Which engine cover is this?

[Konad]

The one circled in red, I've had no luck looking it up thus far. I should mention its on a Gen1, but i'm assuming it looks similar.

 

[Busa1166]

http://partsfinder.onlinemicrofiche.com/hondaeasttoledo/Suzuki_OEM/SuzukiMC.asp?Type=13&A=510&B=6


#12 starter clutch cover



If you go to Honda East site and click oem microfiche, you will see every part on the bike with the part number


edit you wanted the Gen1 go to your year bike and click till get to case covers should be the same part

 

[Konad]

Thanks a ton, not a terribly expensive part. Bike tipped over while trying to change rear links . Really is more of a 2 man job, thank god I had my fairings off.

 

[gurrera]

The one above the circled one in red is the starter idler cover, and the one circled it red is the starter clutch cover.

pg3-26 and 3-27 n the 99 shop manual.
Gurrera

 

[Busa1166]

Thanks a ton, not a terribly expensive part. Bike tipped over while trying to change rear links . Really is more of a 2 man job, thank god I had my fairings off.

I did it alone but I had my bike suspended from above as well as the rear stand and used a floor jack to move it up and down. Sorry for your pain

If you order it from him let him know you are org. sometimes it helps

 

[dadofthree]

Just so you know nudity is forbidden

 

[Konad]

I did it alone but I had my bike suspended from above as well as the rear stand and used a floor jack to move it up and down. Sorry for your pain

If you order it from him let him know you are org. sometimes it helps

I should have better studied the physics of the whole ordeal. I had a jack under the shock mount providing mild pressure with the rear spools also gently resting on a rear stand. The bolt being removed dropped all the weight on the jack, 5 seconds later as I was setting the bolt on the floor she just tipped over.

 

[Busa1166]

I should have better studied the physics of the whole ordeal. I had a jack under the shock mount providing mild pressure with the rear spools also gently resting on a rear stand. The bolt being removed dropped all the weight on the jack, 5 seconds later as I was setting the bolt on the floor she just tipped over.

OOOuuuuuchh