Which fairing (oil change)

[NightCrawler]

Howdy ya'll. Imma gonna do mah fust ool chaing on da ole' Busa, an hadda 'lil questun for 'ya.

Okay seriously.

Does it matter which fairing is removed (clutch or brake side) in order to get to the oil filter? Or rather, would removing one give me better access to it than removing the other?

 

[onerabidshark]

brake side is the one

 

[PDBusa]

Right side, brake side Thats' this one ---->

 

[2quik]

+1

 

[PDBusa]

J/K
Sorry Spigga, I'm a lil' punchy today.

 

[BigBSBusa]

Yep.

 

[NightCrawler]

Thanks all.

And PD, punch away dude ... it healthy to get it outta your system.

 

[GSXcite]

+1 right side. You may want to place some masking tape on the front portion of the fairing before you attempt to put the removed section back. It will assure you do not scratch your plastics when reassembling! It is also easier if you have one other person help align the panel as it seems like it takes 5 hands to do.

 

[Lucky34]

Screw it! I say take of the LEFT side!

Whahahahahaha!!!

 

[busahaya]

Right is Right

 

[NightCrawler]

Note to self ... never ask Busaman86 for advice ...

 

[race1gun]

make a oil drain out of some tin foil so the oil wont go all over your pipes kinnda like a ramp thing . be careful i scratched my header a bit

trying to get the filter off the first time . wish i had put a rag there but i didnt and its gotta small scratch in the powder coat have fun .

 

[rob t]

and DONT over tighten the drain plug !!!remember !!!!!!!!!!!!!!!!!!!!!