Which MC from Brembo?

[kjcili]

Okay, i'm gonna do one more mod attempt before I scrap the whole project and throw my bike off a cliff.

Which master cylinder from Brembo are we using on our Gen I's???
AND, which one of our sponsors do I make this purchase from?

 

[kromdom]

maybe try to contact WarBirdIII for the m/c: https://www.hayabusa.org/forum/gen-...nder-upgrade-pazzo-clutch-handle-upgrade.html

 

[kjcili]

Thanks

 

[GixxerFixxer]

If you're trying to get the bike to stop, it's not the MC you want to change, it's the calipers.

 

[GIXERHP]

And here is my post

https://www.hayabusa.org/forum/general-bike-related-topics/113932-brembo-rcs-install.html

 

[Commuta_Busa]

nah, it's his muffler bearings that need to be upgraded.

If you're trying to get the bike to stop, it's not the MC you want to change, it's the calipers.

 

[kjcili]

If you're trying to get the bike to stop, it's not the MC you want to change, it's the calipers.

It's not that the bike DON'T stop, it's that I have no lever the first few times I pull it, then it will mysteriously go away. If I wrap the lever over-night it's good and tight all day long. Or iff I go for long rides, it'll build back up. The bikes actually stops GREAT, the lever action just sucks. Like i've said in other post, I have to have my Pazzo's on #6 or I just bury the lever into the grip. This is not a caliper problem, and I've bled the bujesus out of the thing, so I'm sure it's the master.

 

[kairles]

I had the same problem, some times you have brakes some times you dont. Swaped in a brembo 19x20, and it all went away. Calipers are the only stock part in my front brake system, and I can have the rear floating with 1 finger.

 

[kjcili]

I had the same problem, some times you have brakes some times you dont. Swaped in a brembo 19x20, and it all went away. Calipers are the only stock part in my front brake system, and I can have the rear floating with 1 finger.

Where did u get the MC 19X20 and how much $?

 

[kairles]

Found mine on eBay for $180. It was a forged model that brembo discontinued. A lot of people go with the RCS series, brembo also makes billet MC that I think is a little cheaper.
Posted via Mobile Device

 

[BigBadDodge]

any updates kj? I have the exact issue you describe with mine.

Also if i switch to a 19x20 brembo can i use my existing levers or is it a different style mounting, just dropped 200 and red anodized roll and clicks and would hate to have to dump em

 

[kjcili]

any updates kj? I have the exact issue you describe with mine.

Also if i switch to a 19x20 brembo can i use my existing levers or is it a different style mounting, just dropped 200 and red anodized roll and clicks and would hate to have to dump em

No. Nothing yet. Trying to scratch some coin together b4 I even make the call cuz I know it's not gonna be cheap. I know how u feel about the levers, I just put on a set of Pazzo's last summer. I don't think we can use them, but I'm sure gonna ask.
Professor told me to talk to Michele @ cycle brakes - one of our sponsors, but thats all I know so far.

 

[kairles]

The levers you have wont work on a brembo M/C. I know for sure ASV makes levers, not sure if Pazzo, or the others.
Posted via Mobile Device