Short extended swingarm pictuers

[sjg34]

I am considering extending my gen 2 but I don't want anything long. Does anyone have pictures they can post of a gen 2 extended about 4 inches or less with the stock tail section?
Thanks

 

[Bobby B]

I'm wondering this too

 

[GNBRETT]

if ur gonna go 4 u mite as well go 6 imo. I've done the 4 and its ok but the 6 will hook better. you can chk out this thread tho. it has Macintosh 4 inch stealth arm on a Gen II.

personally, id get somethn that had a basket in it for a Co2 bottle for an air shifter so u can fit a 2 lb bottle there. it shud last all season.

https://www.hayabusa.org/forum/turbo/168832-how-make-gen-2-best-bike-you-ever-owned-7.html

 

[Kevin Jones]

I saw the pic of the swingarm on there and that stealth is top notch looking. But, unless they moved the license plate later in the thread. That isnt going to work. Hard throttle and the tire will peel that plate up under the fender. I did it so many times, even after making a much longer bracket, that I am now using a 6" farther back bracket for the plate and keep the plate parralel to the ground until my swing arm plate holder gets here.

 

[Jeremy Godo]

I am in the market also for a 4 to 6 inch arm. I want to stay on te cheaper side with less bells and whisles. Just a longer arm to look cool and hook up a bit better.
I am new to this forum and busa life so im not sure what arms are safe and what are arent.
Thx..
Jeremy

 

[POWERHOUSE]

I saw the pic of the swingarm on there and that stealth is top notch looking. But, unless they moved the license plate later in the thread. That isnt going to work. Hard throttle and the tire will peel that plate up under the fender. I did it so many times, even after making a much longer bracket, that I am now using a 6" farther back bracket for the plate and keep the plate parralel to the ground until my swing arm plate holder gets here.

FYI, we have been doing stealth Busa arms on both the Gen 1 and Gen 2 for over ten years, there are no issues with the plate or tail if you don't go over 4" extended. 6" is another story . .

 

[ROADTOAD1340]

Love it !!

 

[piratediverjefff]

@piratediverjefff ~ #EvilArms #PirateDiverJeff #653 *

View attachment 1597031

2"-6" set at about 4" over,just enough to keep the front end down.

 

[greg3852]

This is what I’m in need of.

 

[jeffgordons24]

I think I am about 4 over give or take.

 

[jeffgordons24]

I am in the market also for a 4 to 6 inch arm. I want to stay on te cheaper side with less bells and whisles. Just a longer arm to look cool and hook up a bit better.
I am new to this forum and busa life so im not sure what arms are safe and what are arent.
Thx..
Jeremy

You used to have an extended arm what did you do with it??

 

[GAmedic]

Here is a pic of Fernando's bike that I did a little edit on. I think his is stretched a little.

 

[Mathewrussell52]

Here is a pic of Fernando's bike that I did a little edit on. I think his is stretched a little.

View attachment 1597375

His bike is stunning I love it just needs a little RCC in its life.

 

[RedBull]

His bike is stunning
I love it just needs a
little RCC in its life .

 

[jeffgordons24]

Here is a pic of Fernando's bike that I did a little edit on. I think his is stretched a little.

View attachment 1597375

GODDDDD DAMNNNNN! I mean cmon I am speechless!. My FAV Busa of all time even moreso than my own

 

[jeffgordons24]

His bike is stunning I love it just needs a little RCC in its life.

Agreed, I need some of that in my life too!

 

[Quiksilver]

Can someone teach me how to do this lol

 

[Mathewrussell52]

Here is mine
ATTACH=full]1597772[/ATTACH]

 

[RedBull]

Can someone
teach me how
to do this ? ? ?

Laugh out loud !

 

[Dopey]

I think I am about 4 over give or take.

View attachment 1597136

View attachment 1597137

View attachment 1597138

You know @jeffgordons24 I feel about the same about blue as you do red but your bike is an exception for sure as is @Fernando