Finally got to spray my bike!! HOLY CHIT!!!
- Thread starter teezy
- Start date
bigjack7679
Registered
That is hella fast. Congrats
Sweet!!! 
very good
dragonbusa
Registered
smoking! whats it turn on motor?
teezy
Registered
Sweet!!!
thank you good sirs!!! Its a blast!!
Best I have been so far is
1.30 60ft
5.54@125
8.75@151
unforunately its 90-110 degrees with 90% humidity in texas right now.DA was 3270 saturday. hopefully once we get some 50-60 degree weather the times will improve... Im still planning to get the head ported and put some rods in it.. then turn the wick up..
teezy
Registered
Thats kinda of tough to say.... She made 217whp on motor last pass STD corrected. with my bp at 800psi she made 286whp and at 900psi she made 298whp... But thoses are STD corrected numbers which is corrected to 60 degrees outside. In 90 degree weather she makes around 265whp. I run a regualtor too keep my bottle pressure lower so it takes a larger jet then normal to make numbers.
methyman
Never Forgotten
Yes the heat make the bottle pressure go up for sure. The bottle pressure can get so high the solenoids won't open up. It has happened to me on my 1990 mustang with a 150 shot of nitrous back in the day! Texas heat is different from Florida heat. The humidity here is always high!
teezy
Registered
Very nice
Rearick Racing 1397cc stock rods
Rearick Racing cam only package ,unported head
Rock Solid clutch
And Rearick Racing build and tuned.
Sweeeetttt!!!!!!!!!!
Good job
Good job!
thank you guys!!!
Now get that sucker to a 1/4-mile track and knock on those 7's...
Got to get rods in her first... 1/8 mile aint hurting them....1/4 mile would be a different story
mysticblu999
Registered
7s for sure in a 1/4.how long is your bike and what clutch do you have if you don't mind sharing.
teezy
Registered
thank you sir!!!
not at all she is 69". The clutch is ROCK SOLID MANUFACTORING.
lankeeyankee
Banned
When nitrous gets to hot the liquid turns into a gas I forgot the number its around 87 degrees....
This is one of the downsides to running nitrous in areas where the temps get 90+ degrees its not so bad when it gets to be 60 outside a heater takes care of that!
I hope you are running a purdge so you can get your PSI down to around 850 before you spray the engine.. If your tuned at 850PSI and you spray with a bottle PSI of 950+
you are running lean and possibly damaging your motor.
lankeeyankee
Banned
Not sure if you have ever heard of BOSSNOSS?
I was thinking of going this way back when I ran nitrous and battling with the high tempatures. Its interesting.
[video]http://www.bossnoss.com/videos.html[/video]
I was thinking of going this way back when I ran nitrous and battling with the high tempatures. Its interesting.
[video]http://www.bossnoss.com/videos.html[/video]
