I have searched and tried some things but no real luck. I am running out of ideas. I have a 00 Busa with about 60K on it Two Brothers Exhaust PCII Small Airbox mod and a BMC race filter. I dont think the mods are the problem because I have had them for some time and it ran beautiful. Last year I started having this issue. I replaced the plugs cleaned the air filter, Took the fuel filter out screens out of the injectors they all looked great but I took them out anyway. I had the TPS set the valves adjusted. I am at the end of my rope. At idle it will surge and kind of miss or something, but not all of the time. Sometimes when you try and take off putting a load its fine others it spits and surges, if you rev it up it seems like it cleans out and runs OK when it acts up. Under 3K it surges very badly. Not all of the time again but most of the time. Now I know fuel injected cars have open and closed loop for the computer to control the fuel. The bike runs much better when it is cold. Also the FI light has come on twice in the last couple years. Is there a way to check the codes like a car? Is there a closed and open loop fuel setting? I am considering having the injectors cleaned and set. Are there any other ideas has anyone found a fix for this as I have seen this problem before on the board. It feels like a half of a miss on one cylinder. Not a complete miss because you would really feel that. Please what ever you all can come up with for ideas. I love my bike and it has given me years of great dependable riding, but this is driving me crazy...[/QUOTE
When you do the airboxmodification you will loose some torque at lower rpm's. Above 3000rpm's you will win between 2 and 4 hp's. It is recommended to use a powercommanderbox to correct the air/fuelratio, because when you have done the airboxmodification you will feel some little dips in the lower rpm's.
Responding to low rpm hesitation.
I have searched and tried some things but no real luck. I am running out of ideas. I have a 00 Busa with about 60K on it Two Brothers Exhaust PCII Small Airbox mod and a BMC race filter. I dont think the mods are the problem because I have had them for some time and it ran beautiful. Last year I started having this issue. I replaced the plugs cleaned the air filter, Took the fuel filter out screens out of the injectors they all looked great but I took them out anyway. I had the TPS set the valves adjusted. I am at the end of my rope. At idle it will surge and kind of miss or something, but not all of the time. Sometimes when you try and take off putting a load its fine others it spits and surges, if you rev it up it seems like it cleans out and runs OK when it acts up. Under 3K it surges very badly. Not all of the time again but most of the time. Now I know fuel injected cars have open and closed loop for the computer to control the fuel. The bike runs much better when it is cold. Also the FI light has come on twice in the last couple years. Is there a way to check the codes like a car? Is there a closed and open loop fuel setting? I am considering having the injectors cleaned and set. Are there any other ideas has anyone found a fix for this as I have seen this problem before on the board. It feels like a half of a miss on one cylinder. Not a complete miss because you would really feel that. Please what ever you all can come up with for ideas. I love my bike and it has given me years of great dependable riding, but this is driving me crazy...[/QUOTE
When you do the airboxmodification you will loose some torque at lower rpm's. Above 3000rpm's you will win between 2 and 4 hp's. It is recommended to use a powercommanderbox to correct the air/fuelratio, because when you have done the airboxmodification you will feel some little dips in the lower rpm's.
Responding to low rpm hesitation.
I would have to look it up for the specific name, but there is a vaccum sensor that bolts to the back left side of the airbox.
I chased the surge for almost a year on and off, I could even get it to go away and then it would come back. Make sure none of the vaccum lines are pinched and I would use the troubleshooting guide of your manual and start testing the FI sensors.
I dont can anyone post on here how to do this?
What exactly is a Honda s2000, some type of car ?!
Yup. I have s2000 injectors on my bike.
Just out of curiosity, and not trying to thread jump or cross post as I posted a thread earlier with my similar symptoms..but on my 99 when I turn the TPS to the extreme "up" direction, dash is high on the cluster, the stutter at that rpm goes away instantly although the bike runs super rich, like enough you can smell it standing near it. Anyone else have similar result?