07  Gixxer 1000 mastercylinder

[Turbo810]

I bolted up my 07 mastercylinder today. It will fit. You have to move the wires around the backside of the fork and position the the mastercylinder just right. It will rub just slightly but won't engage the brake. Here is a pic.

 

[Mr Bogus]

How long and how much did the mod cost? radial master correct?


not trying to be the "signature" police but they had issues with large photos in the sigs..

you might want to reduce that thing and get it under like 35 or 40k.. They had to turn of signatures for a time because a few were approaching a 1/4 meg or more.. The dial up guys get slammed when try to view the page..

 

[Mr Bogus]

here is a fixed copy of the image.. 1/10 the size

 

[Turbo810]

I bought it from Ebay. It came off a brand new bike. I think I paid $140 delivered. You need new lines for this mod. I haven't bought them yet. Still not sure I am going to install them yet(I also have the K7 clutch master). Just trying to give a heads up for those that are thinking about doing it.


BTW thanks for the help with signiture pic.

 

[Dobieman]

I would not use it the way you show it mounted now. Maybe a Helibar kit could move it back and get clearance?

 

[Aquaman]

I would not use it the way you show it mounted now. Maybe a Helibar kit could move it back and get clearance?

+1 This is where clip on's would help

 

[Tufbusa]

I think I'd use a stick on wheel weight on the bar stops, or at least the left one to allow some clearance with your fairing. If you decide to use it?

Race guys commonly use wheel weights as bar stops.