Due to bad vaporlock problems, I just finished converting my '99 'Busa external fuel pump to the internal one, and I wanted to give a quick report. I sourced all of my parts from eBay and this forum, (mostly used) for about $550.00 total plus shipping. My labor was maybe 3 hours or so, with no special tools needed. The hardest part was getting the old tank off the bike without spilling too much gas on the floor or myself, even though my fuel level was fairly low at the time. I got a clean, undented 2001+ tank from eBay for $300 plus shipping, but if you do this, make sure it comes with the heat shield. I got a low mileage pump, the o-ring that seals the pump to the tank and the mounting screws, the fuel line and clips, and a pre-made "plug and play" wiring harness and a 2001+ injector rail from a fellow forum member for around $250. This wiring harness made the job very easy. If anyone is thinking about making this conversion and is interested in more details, PM me and I will be glad to share what I know.
~Warp 7~
Albuquerque, NM
1999 GSX1300R Hayabusa (Time travel is now possible)
2008 BMW R1200 GSA (Have gravel/will travel!)