4-way Flasher Mod

[elsmooth]

I am trying to mod my 03 Busa with the the 4-way flasher option. I have an 06 switch, but need help with the wiring option. The new switch has a couple of more wires and I don't have a wiring diagram.

Thanks

 

[DR1300R]

Wow I upgraded my 2000 low budget Busa to late model switches as to have the flash to pass and the 4 way flashers, But no documentation and its been so long ago that I don't remember..
Let me search this as MCMustang did a write up I beleave..

ps I remember it was easy though..

 

[DR1300R]

Bingo got it.. link below go to page 2..

https://www.hayabusa.org/forum/electrical-mods/58940-has-anyone-put-hazards-flash-switches.html

It should be a sticky..

 

[dadofthree]

Also there was a download of the manuals for the GenI. They included electrical diagrams.

 

[dadofthree]

Try this my brother


https://www.hayabusa.org/forum/maintenance-do-yourself/24284-permanent-shop-manual-hosting.html

 

[elsmooth]

bro, I need the service manual for 2006 or later. The one listed below is for 99-00. Thanks

Try this my brother


https://www.hayabusa.org/forum/maintenance-do-yourself/24284-permanent-shop-manual-hosting.html

 

[BusaWhipped]

There are changes to the wiring harness between 00 and 06. But for most things, it will work just fine.

 

[DR1300R]

You should be able to do the mod with no problems with the link I posted up. Its the same one I used..

 

[elsmooth]

The link to page 2 references connectivity if you have a euro switch. I do not. I have a 2006 switch which has more wires than my stock plug. Wires exist in the slots that the directions indicate for you to use the 2 shorting wires from the old plug. Did you an 06 switch, if so what did you do with the orange/blue and yellow extra wires from the new switch?

 

[elsmooth]

There are changes to the wiring harness between 00 and 06. But for most things, it will work just fine.

True. However, the 4-way flashers don't work without some modifications. I installed the news switches some time ago, but never hooked up the 4-way flasher. The flash to pass works fine.

 

[DR1300R]

The switches I put on my 2000 model are off a '06 as well and mine work like they came on there from factory.. Hooked them up using post #2 link...