Custom Gen 1 srad scoops

So, I Really like these and know of people here in South Africa that would want those. However work wise people here are little worse for wear, but if you could give us an estimate price, something they can work towards, possibly estimate a shipping cost also, Im sure id get my Gen 1 bros to get some. Awesome work.
I would price a set at 25 AUD plus however much for a tracked parcel, ill need to have a chat to my post office or check online to see the cost to go from Oz to S/Africa
 
I'm getting pretty excited now, almost got the base matched perfect to the mesh screen, almost time to design the main scooper
20201020_192520.jpg
20201020_192514.jpg
 
From the Schnitz site regarding intake scoops..

"PRODUCT DESCRIPTION
Carpenter Ram Air Scoops Suzuki GSX1300R Hayabusa (99-07)

carpenterracinglogo.jpg


Studies have shown that the ram air design of the 1999-2007 Hayabusa becomes ineffectual at higher speeds. The contours of the nose actually produce negative pressure around the air intakes at speeds up to 140 mph. Our scoops remedy that problem and look good doing it, adding an aggressive styling to the king of sportbikes.

Our Power Scoops help pressurize the airbox more effectively, making a smoother, more predictable power curve. There is a pressure increase as soon as you start to move with notable increases at high speeds.

Power Scoops are quick and easy to install. The entire job takes less than 10 minutes. Everything is included; all you need is an electric drill.

These scoops are easily attached to the stock air intakes on the front fairings of any year Hayabusa. Noticeable gains are made on stock bikes, or a highly modified Hayabusa. The Fish's Custom 'Busa was equipped with these on it's 213.27 mph blast at the Maxton Air Strip. The scoops come with instructions, and fasteners.

Installation Instructions:

  • Drill hole through the center of color dot
  • Fit into fairing and scribe through hole with paper clip leg
  • Remove and drill hole on scribe mark
  • Reinstall and firmly push button lock through hole until flat
*Fits 1999-2007 Suzuki GSX1300R Hayabusa only"
 
plus I'm pretty gifted with cad programmes and designing, when I say better looking these will be better looking, im not doing this just to make money, im doing this to save money because I feel the capenter ones look out of place and I know I can do better
...and you MIGHT be able to make them for gen 2 whereas the Carpenter ones are not available.
 
interesting, could you 3d print them in carbon fibre?
Currently I can do pla and abs/nylon, carbon fibre filament requires me to upgrade my extrusion head to a hardend steel tip in order to get a better life span from my tips, fiberous filaments wear the standard brass tip pretty quick. Maybe in t he near future, would be cheaper to hydrodip them
 
interesting, could you 3d print them in carbon fibre?
If your chasing the carbon fibre look, the printed result doesn't look like that, it comes out looking the same as every other filament, it just has fibers in the filament, where as proper carbon fiber has that woven look because its either true carbon fiber mat in resin or its hydrodipped
 
I would price a set at 25 AUD plus however much for a tracked parcel, ill need to have a chat to my post office or check online to see the cost to go from Oz to S/Africa
We haven't seen the finished product yet...but I think yer price is too LOW.
You're going out of your way...everyone's time is valuable.The R & D, Packing/shipping to and fro the post office,etc.
I demand you raise your prices...
cursin.gif

Rubb.
 
We haven't seen the finished product yet...but I think yer price is too LOW.
You're going out of your way...everyone's time is valuable.The R & D, Packing/shipping to and fro the post office,etc.
I demand you raise your prices...View attachment 1628155
Rubb.
Cheap sells more numbers, a 500 gram roll of filament is 25 bucks i reckon I could get maybe 50 sets out of half kg rolls(if my maths is right), so it'll endup being a profit, unless you wanna be my sales rep... then the price might raise abit, as an example, i print gel blaster parts aswell, and a injection molded piece that would cost me say 70 bucks, people sell 3d prints of it for less than 30 bucks
 
Cheap sells more numbers, a 500 gram roll of filament is 25 bucks i reckon I could get maybe 50 sets out of half kg rolls(if my maths is right), so it'll endup being a profit, unless you wanna be my sales rep...
"Hello. My name is Rubbah. I'm the North American rep for Outback Custom Designs." "We're OCD... about the parts we create and fab."
"Take our go-fast mods to your local track and put the competition 6 feet..."Down Under."
"Best parts,best prices...and that's no croc,mate."
All spoken with an' Australian accent for the internet ads... :D

OK...it needs work. Thats just off the top of my head.
Rubb.
 
"Hello. My name is Rubbah. I'm the North American rep for Outback Custom Designs." "We're OCD... about the parts we create and fab."
"Take our go-fast mods to your local track and put the competition 6 feet..."Down Under."
"Best parts,best prices...and that's no croc,mate."
All spoken with an' Australian accent for the internet ads... :D

OK...it needs work. Thats just off the top of my head.
Rubb.
Sounds like your boarding a plane tomorrow and you and me are hitting the track days with our stall, selling custom busa parts
 
Sounds like your boarding a plane tomorrow and you and me are hitting the track days with our stall, selling custom busa parts
I'd love to. A few laps first...then do some work. Then into town...maybe some of the older "Shelia's" would find Rubb's accent entertaining. :p
Rubb.
 
if you got tatts and big muscles and a man bun, then yea they will bang you

rofl.gif
Tat's...got that covered...

tats.JPG


busa tat 2.jpg


muscles...I'd have to start working out again...hardcore diet...perhaps some heavy steroid use...you know what? I'll do it. I used to sport decent traps,delts,bi's & tri's...I got vacation fat gut going on in this pic...

me 2.JPG


the hair (man-bun)...I'd have to buy. Perhaps "Hair Club for men" or some of that magic shampoo krap...
rofl.gif

Rubb.
 
Back
Top