Double Bubble from Japan

I just ordered a Puig Dark smoke racing screen. 4826F. 90 bucks on amazon.
 
sgerry said:
Hi gang- my name is Shane, and I’m ridiculous.

I’m ordering parts for a bike that I haven’t even ordered yet.

So, I ordered the double bubble that another member posted from eBay. $103 shipped FedEx
(katsuyamteitok_0 on eBay)
With the resin shortage, figured I’d get mine at least.

It came from Tokyo via FedEx, took about a week.
I remember the smoked Zero Gravity double bubble on my Gen 1, quality wise this seems to be on par. For $100 I went for the tint. According to their measurements this isn’t as high as the ZG DB.
Minor box rub came off with windex, same with fingerprints. I’m looking forward to slapping this on when I get my Busa.
View attachment 1645916View attachment 1645919View attachment 1645921
Click to expand...
You could throw it on my bike until yours comes in!
 
sgerry said:
Hi gang- my name is Shane, and I’m ridiculous.

I’m ordering parts for a bike that I haven’t even ordered yet.

So, I ordered the double bubble that another member posted from eBay. $103 shipped FedEx
(katsuyamteitok_0 on eBay)
With the resin shortage, figured I’d get mine at least.

It came from Tokyo via FedEx, took about a week.
I remember the smoked Zero Gravity double bubble on my Gen 1, quality wise this seems to be on par. For $100 I went for the tint. According to their measurements this isn’t as high as the ZG DB.
Minor box rub came off with windex, same with fingerprints. I’m looking forward to slapping this on when I get my Busa.
View attachment 1645916View attachment 1645919View attachment 1645921
Click to expand...
Nice
Did you ever find out who manufactured it? Do you know how much taller it is than the stock screen?
 
2fun2Blegal said:
Nice
Did you ever find out who manufactured it? Do you know how much taller it is than the stock screen?
Click to expand...
No, honestly I didnt look very hard mind you...

Per ZG's measurements, their SR (stock replacement) screen is 15 cm / 5.91' tall.
If im reading the ebay link correctly, this is 17 cm / 6.69' tall =2 cm taller, just over 3/4"

I like the look and am hoping the double bubble moves air just a tad higher without helmet buffeting.



For reference, the ZG DB is 17.8 cm / 7.01' tall (according to ZG, this is 1' taller than stock.
 
Kiwi Rider said:
No, you're NOT ridiculous at all . . .
you are 'acting in faith' .
Definition of faith is ......

Hebrews 11:1 ..... Faith is the substance of things hoped for . . the evidence of things not seen.

That screen IS 'the evidence' of the very thing not seen yet, the substance of the very thing you hope for, your new Busa!!!
(hope I'm not quoting that verse out of context)
Click to expand...
Even I did the same thing, so there are a lot of us who do that.
 
11BBB16F-31E2-4D2D-8C1E-642AAA9752A5.jpeg
2D6E9210-7471-48B6-9F2A-6E9F7ACE0385.jpeg
4D222272-11F8-4B5E-A39E-F05AB3D189B5.jpeg
CFB99313-AE75-4939-91BC-377DB6624083.jpeg

7” vs 5 1/4”
 
3M Scratch and Swirl remover on a microfiber cloth works extremely well.

I didn't know there was a resin shortage. I don't recomend a Yanna Shiki windscreen based on the one I bought in 2012. It was basically a flat sheet of plastic that was heated up and bent a little bit. You have to flex them to install them and they don't have a lip around the edge to fit the fairing. That went straight in the trash.
 
Mythos said:
3M Scratch and Swirl remover on a microfiber cloth works extremely well.

I didn't know there was a resin shortage. I don't recomend a Yanna Shiki windscreen based on the one I bought in 2012. It was basically a flat sheet of plastic that was heated up and bent a little bit. You have to flex them to install them and they don't have a lip around the edge to fit the fairing. That went straight in the trash.
Click to expand...
I actually use that on visor scratches. I've also used it on top of my tank bag clear vinyl cover. Super cover polish takes paint, smudges, anything off of anything plastic.:bowdown:
 
sgerry said:
Hi gang- my name is Shane, and I’m ridiculous.

I’m ordering parts for a bike that I haven’t even ordered yet.

So, I ordered the double bubble that another member posted from eBay. $103 shipped FedEx
(katsuyamteitok_0 on eBay)
With the resin shortage, figured I’d get mine at least.

It came from Tokyo via FedEx, took about a week.
I remember the smoked Zero Gravity double bubble on my Gen 1, quality wise this seems to be on par. For $100 I went for the tint. According to their measurements this isn’t as high as the ZG DB.
Minor box rub came off with windex, same with fingerprints. I’m looking forward to slapping this on when I get my Busa.
View attachment 1645916View attachment 1645919View attachment 1645921
Click to expand...
Wow that looks slick, make sure to put electrical tape on all the slide in sections, it will stop the screen from sqeaking
 
I actually like the flow of the OEM screen on the bike, but always can use more wind protection. I wasn't wild about the ZGDB on the Gen3 so I ordered the low profile version. Crazy wait time, but at least it's in que.
 
InfiniteReality said:
I actually like the flow of the OEM screen on the bike, but always can use more wind protection. I wasn't wild about the ZGDB on the Gen3 so I ordered the low profile version. Crazy wait time, but at least it's in que.
Click to expand...
Hi i would love to see a picture of your bike once its mounted im very curious to see how the low profile ZGLPDB will fit and look in a bike thats not from the ZG site. Did you ordered in smoke or clear version?
 
You must log in or register to reply here.

Similar threads

Banger
Double Bubble? Or Don't Bother?
2
Replies
30
Views
4,789
argyle66
A
O
Double Bubble windscreens
2
Replies
28
Views
1,468
OB_Dirty Pete
O
H
double bubble windscreen, which one?
2
Replies
24
Views
4,085
miserycaptain
miserycaptain
ThunderPants
Zero Gravity Double Bubble
2
Replies
20
Views
2,825
Busa45
Busa45
RussellJ
Suzuki OEM Double Bubble Windscreen
2
Replies
20
Views
4,317
busafan08
busafan08
Back
Top