Exhaust experts please read

[StrtRac3r]

So in rebuilding my bike I found the hardest parts to take off were separating the exhaust pieces from each other (gen I yosh rs3 4-2-1) has anyone ever tried anti-seiz on the pipe joints? I mean if it can handle the temp of a spark plug would it work?

 

[Flicka]

Yes, it is recommended and works fine.

 

[StrtRac3r]

Cool thanks, might have been a dumb question but the bikes I have bought already had aftermarket exhaust on them, never had to deal with it.

 

[Flicka]

Not a dumb question at all. Nobody was born an expert on all this stuff.

 

[Ludicrous Speed]

Mine was still tough to get apart, but at least it came apart with the anti seize

 

[dadofthree]

Carbon build up, have fun, let the wrestling begin

 

[Strife]

If it gets real tough, you can resort to Lightly taping it with a rubber mallet or hammer while trying to pull apart. Something to cause vibration. If you use something hard like a steel hammer,be sure to hit it in a place you won't mind a possible ding.