8 yr old thread...you may be waiting a while for an answer although I have seen the OP on recent threads lately so you might get lucky....
Exhaust mod
- Thread starter Mason357
- Start date
RedBull
Registered
Nothing wrong with ghetto ,
just get a good look
while it is sitting still ,
because you would not
see it until the next stop .
Last edited:
Somebody was already fishing in this hole.....
Yes I know maybe someone answer! And you answered me
Maybe...
I would figure if you were to drill holes in the baffle plate, 8 mm holes would be sufficient.
I'd be opting for an aftermarket slip on system or a full exhaust if it were me.
Thank you, yes iam gonna buy mivv exhausts next year.
RedBull
Registered
#ExhaustMod ~ #MiVV ~ #MufflerMod ~ #OvalMuffler ~ #THEoRg *
Muffler Mod with Pics | Busa Mods
Here are some pics of the muffler mod I did to my 07. I took the advice from what I could find in the archives, however, I felt that pics of the tools used would be helpful. I should have done this 2 months ago when I bought the bike.
Last edited:
KaranSran
Registered
I’m new to the forum and thought I’d share the mod that i did to the Gen2 exhaust. I took off both the cans without the link pipes and had a metal drill extension that i used to drill several holes on the baffle plate which is approx 10 inches deep. The baffle plate is not too strong and used the tyre levers and hammer to knock the smaller holes to a bigger one. Took approx 45 mins. for both the cans and now it has nice deep sound at idle and acceleration
Berlin Germany
Registered
@KaranSran
just out of curiosity - did you already measure the new power of your bike at a test bench?
i suppose you lost power
just out of curiosity - did you already measure the new power of your bike at a test bench?
i suppose you lost power
KaranSran
Registered
@KaranSran
just out of curiosity - did you already measure the new power of your bike at a test bench?
i suppose you lost power
No, i just wanted to keep the original looks and make it a bit louder as i commute to London. The available power is already more than enough so didn’t test it or even thought about it. Bought a spare decent condition genuine exhaust from ebay before i messed with this so that i have it to replace if I didn’t like the sound@KaranSran
just out of curiosity - did you already measure the new power of your bike at a test bench?
i suppose you lost power
Similar threads
