Frisbee's baby has open heart surgery

Well looks like the lung/heart thing worked.no changes except airbox mod small and all short stacks,bike lost a little down low but got about 3hp and 1.5 ft lbs of torque over the whole scale range.

158 hp
95 ftlbs torque



<!--EDIT|GoldenChild
Reason for Edit: None given...|1154817444 -->
 
cool.gif
laugh.gif
 
ok what is the advantage to short stacks and where to get them?
 
Well looks like the lung/heart thing worked.no changes except airbox mod small and all short stacks,bike lost a little down low but got about 3hp and 1.5 ft lbs of torque over the whole scale range.

158 hp
95 ftlbs torque
Geese the same numbers my bike made when I had the Akrapovic full exhaust system, BMC Race Filter, Small Air box mod. Very nice...did the same air box mod, just used Ryan's short velocity stacks instead. I am getting another custom map on Tuesday for the Tsukigi Spec II Race system. Interesting to see if the numbers change for the good/bad....also have 5K on her now. Nice work.
 
i thought all short stacks gave you more torque in low end?
 
Great story... Make that thing as fast as you can, so that it won't take any time for Frisbee to deliver the RoadLoK that I am going to win...
smile.gif
 
i thought all short stacks gave you more torque in low end?
I will say this always remember dyno #'s are just that dyno #'s.this bike ran 14:1 and made good power,but what are you gonna do when more air is forced in there while riding?motor goes more leaner makes a little more power at the cost of wearing motor prematurely.This bike will show less power/torque when I finish the dynotune on just motor,but i tell you what when it gets on the street and more air is forced into it with a 12.5 to 13.1 a/f all the way across the screen on the dyno,this thing is gonna surprise frisbee.lol he will tell you about it after his first ride..HAHAHAHA



<!--EDIT|GoldenChild
Reason for Edit: None given...|1154884780 -->
 
short stacks, long stacks? all of either one whatta the advantages
 
I just heard about this post from Daniel today . I can't wait to get on it next week. Daniel ,You are the man!!
cool.gif
 
Sorry to wake you frisbee,but I got excited and then realized what time it was...Well fellas Frisbee is now a flying saucer.Frisbee welcome to the 200Hp Club..160hp/97 ftlbs of torque all motor with short stacks,bmc filter,small airbox mod and fresh tuneup with a ffi box.The way it is setup your'e gonna make even more power on the street when this thing gets some air thru it.....This thing would be a monster with the newfound power stock wheelbase but it won't be short when you get it back...lol...I installed the system and with the fast fi box and all mods listed above and a little small .036 jet first run bike pops off a 208 hp/131.9 ft lbs of torque dyno run...Congrats Frisbee and we will see you on it next week at the track for your first flying session....:D ....If anybody else wants to come out and play let me know....August 18-20th Bremerton Raceway...Be There....i'll post a few pics of the setup during testing....tomorrow.

I found out tonight for sure that my dyno is somewhat stingy,when looking at the #'s this bike made...I can't wait to test ride it after all the little cosmetic mods are done...Good Night All.



<!--EDIT|GoldenChild
Reason for Edit: None given...|1155138618 -->
 
Back
Top