Front axle removal

[MR Felt]

What tool do you use to back the front axle out?
On my Yamaha I was able to invert a spark plug socket but the busa is larger. It looks like it measures 27mm from
corner to corner.

 

[BlueHaya]

I think the tool I made has 2 5/8" nuts on a bolt.

 

[BlueHaya]

https://www.hayabusa.org/forum/general-bike-related-topics/89694-front-axle-removal-help.html

 

[Blanca BusaLess]

https://www.hayabusa.org/forum/general-bike-related-topics/89694-front-axle-removal-help.html

There ya go. Thats what I was talking about. Homemade..

Or heres a couple on Ebay...
$14.99
Front Axle Removal Tool 17 19 22 24mm Suzuki Honda Kawa: eBay Motors (item 370410779979 end time Aug-20-10 07:56:39 PDT)

$9.99
24mm Front Wheel Axle Removal Tool GSXR1000 HAYABUSA: eBay Motors (item 310233905500 end time Aug-13-10 10:16:48 PDT)

 

[MR Felt]

https://www.hayabusa.org/forum/general-bike-related-topics/89694-front-axle-removal-help.html

That's the ticket....functional and cheap.

What about the swingarm??

 

[BlueHaya]

That's the ticket....functional and cheap.

What about the swingarm??

now you get tricky. Swingarm has the cut socket. I ordered a set from a friend of SmithaBusa. It has all 3 you need to pull engine and swingarm.
SUZUKI TOOLS

If you have a way and time...you can make you own of those as well.

https://www.hayabusa.org/forum/general-bike-related-topics/9525-made-my-own-swingarm-socket.html

 

[BusaWizard]

I have several, I made one from two 5/8 nuts and a bolt also. You can get a 5/8 coupler from home depot as well.

 

[Rainbow7]

I went down to my local fastening supplies place and got one of those 24mm nuts. I just turn it with an adjustable crescent. Cost me, like, $3.