Front brake delete brake line length

[SS4Luck]

For those of you that have deleted a front rotor, any chance you know the length of the brake line you ran dowin to the front caliper? I’m trying to get some new lines made and I am not going to be around my bike for a few days

 

[TonyM995]

I’d measure yours. My forks are lowered as far as they can without having the forks turned down. Half of the bottom clamp is on taper and I wouldn’t recommend doing that. The front is so low when fully strapped I was spinning the tire and

My measurement was 29” for the left side and 26” on the right side.

For a single side I just change the banjo bolt at the master cylinder and just run the left side.

I’m putting both rotors back on for this year and feel at the drag strip a single rotor is fine but on the street a single rotor with no rear brake is sketchy. I’m also putting the rear brake back on.

 

[pcs]

just run a shoe string from the master to the caliper then measure it.

 

[Fernando]

For those of you that have deleted a front rotor, any chance you know the length of the brake line you ran dowin to the front caliper? I’m trying to get some new lines made and I am not going to be around my bike for a few days

Stand by, let me check

 

[Fernando]

here's the measurements. I hope that helps



 

[SS4Luck]

I’d measure yours.

don’t come in here waving your logical answers in my face, sir.

 

[TonyM995]

don’t come in here waving your logical answers in my face, sir.

As we are discussing removing the brakes on a fast and heavy bike! Hahaha


Damn look at Fernando with a full 12” over here.

I love those red wheels btw.