Fuel injector bolt nightmare

[hpeagler75]

Trying to clean fuel injector arrive at my possible nightmare these damn ass bolts they put on here reaching out to BUSA nation on A. How to remove them without completely stripping them? B. How to remove them if stripped? C. Is there another way to clean injectors without removing them?

 

[SSGT_B]

They use a JIS screwdriver not Phillips. Sometimes a few light taps on the back of the driver while twisting with a hammer helps.

 

[Mathewrussell52]

I used a zipdisk and cut a line in it and used a big flat head screw driver.

 

[hpeagler75]

Thanks guys for both of your suggestions will try them

 

[hpeagler75]

Nightmare has became a reality can't get two bolts off tried with a JIS but was too late then tried the flat head way thanks guys for information just have to take it to a place I dread a Gdamn shop

 

[SSGT_B]

Can you grind the heads off then remove bolts after injector removed?

 

[Mathewrussell52]

Nightmare has became a reality can't get two bolts off tried with a JIS but was too late then tried the flat head way thanks guys for information just have to take it to a place I dread a Gdamn shop

For some reason they are tight every time. Did you try a zip disk?

 

[Bigboy Busa2]

Nightmare has became a reality can't get two bolts off tried with a JIS but was too late then tried the flat head way thanks guys for information just have to take it to a place I dread a Gdamn shop

I would cut the plastic and grab the head with vise grips before I took it somewhere. You can order that fuel rail cheap and have extra parts. Be a lot cheaper and satisfying

 

[Mathewrussell52]

$27 on ebay and you’ll het new screws prob $8 a piece through suzuki.

 

[Bigboy Busa2]

$27 on ebay and you’ll het new screws prob $8 a piece through suzuki.

View attachment 1640356

I have ordered a hand full of stuff from them. Fast shipping and very descriptive. I do shake my head sometimes, if you look at all the items that are listed, that's crazy. I got the engine cases for the new build from them

 

[hpeagler75]

Sorry for late response thanks guys got it taken care of bout to pick it up today