gen 2 dash pin out

[vrizi]

can anybody help me with a gen 2 dash pinout, I have been doing searches, and all I can find is the pinout for the gen 1. I think I might have a ground issue in the dash, as my gear position just reads a dash, the temp gauge reads full hot, and I have no odometer. I have checked the gear position sensor, and all the voltage and ohms are correct going to the ecu, so my thought is the problem lies between the ecu and dash. If anybody can help with the dash pinout it would be greatly appreciated.

thank you

 

[BigBSBusa]

I have had a loose connection into the gauge cluster that caused similar symptoms, as well as, a bad temp sensor at the back of the engine. Others have found that a SpeedoHealer with ATRE functions have caused a problem. Others will be hear soon to add.