Insane! I see it, but i still dont beleive it! It's like a magic pocket, looks the same size but you can stuff an elephant in there! I applaud you!
Thank you sir
Gen 2 Trunk Mod
- Thread starter sixpack577
- Start date
Thank you sir
k8BlueGoldBusa
Registered
Done!! For sure love the space in there. You can see it a little from the side. It must have slid down a little before I drilled and mounted it.
k8BlueGoldBusa
Registered
I was thinking about raising it a bit but I dont think it'll rub. My girlfriend is only like 100lbs.
just keep an eye on it cause i would hate to see you lose your stuff out on a ride over time. i weigh 250lbs and ride solo, moderately aggressive on the backroads, and i get some minor rubbing. i also have a rear hugger as well so that will take an inch or two from clearance
k8BlueGoldBusa
Registered
Ya I will im like 205. But that would suck. Lol
InfiniteReality
Registered
Just a heads up, mine didn't rub at all and I'm 210... My wife which MAY on a good day weigh 100lbs wet caused it to rub a hole through the trash can. I still need to replace mine, glad I saw this since plastics will be off for plasti-dip this weekend I can replace while off.
I think this was one of the best mods ever dreamed up- I'm a stickler for bringing stuff with me lol. Here's my little contribution to the trunk mod thread.
It is max depth without protruding from the bottom - the side shot of the bike is with this trunk in it. Used the Home Depot Trash can. I'm stretched about 7.5" with the stock shock tightened down. Haven't ridden a psgr yet, but my passengers are light and I'll likely tighten down the rear a bit more.... so rub isn't an issue. I took time to cut it as precisely as possible to get max depth and max wall height all around.... Two 12v outlets flushed on the clutch side wall. The forward outlet is switched with a relay, the rear one is constant. I also have the hump mod, so I can really stash bodies in the trunk. Thanks 6-pack for the incredible idea.... an awesome idea with my creature-comfort twists to it.....
Finished product.....
Bike with the trunk in it.....
Some randoms.....
Pulled the rear back and zipped it to the 'nubs' in the back - added about an inch overall in length.....
Black siliconed the edges and rear to help seal and support it.....
12v holes.....
Finished with outlets (I brought the walls all the way up to make it look clean.....
Disc lock pouch thingy hooks to the rail perfect and is great for keeping small stuff in.
That's a co2 tire kit with a few tools, zip ties and ziplocs in it. I tied it to the brace to maintain "floor space".....
It is max depth without protruding from the bottom - the side shot of the bike is with this trunk in it. Used the Home Depot Trash can. I'm stretched about 7.5" with the stock shock tightened down. Haven't ridden a psgr yet, but my passengers are light and I'll likely tighten down the rear a bit more.... so rub isn't an issue. I took time to cut it as precisely as possible to get max depth and max wall height all around.... Two 12v outlets flushed on the clutch side wall. The forward outlet is switched with a relay, the rear one is constant. I also have the hump mod, so I can really stash bodies in the trunk. Thanks 6-pack for the incredible idea.... an awesome idea with my creature-comfort twists to it.....
Finished product.....
Bike with the trunk in it.....
Some randoms.....
Pulled the rear back and zipped it to the 'nubs' in the back - added about an inch overall in length.....
Black siliconed the edges and rear to help seal and support it.....
12v holes.....
Finished with outlets (I brought the walls all the way up to make it look clean.....
Disc lock pouch thingy hooks to the rail perfect and is great for keeping small stuff in.
That's a co2 tire kit with a few tools, zip ties and ziplocs in it. I tied it to the brace to maintain "floor space".....
Last edited by a moderator:
BKNBLCK2011
Registered
This is great! Ill be doin this one. Excellent idea man.
Thank you sir
LOL, I didnt have but a few miles on mine and my wife was like, what are you doing? You just have to take your time.
copeland316
Registered
I am extremely impressed w this fab! I only own Gen1 Busas tho. Is this even possible w my Gen1 bikes..?
Sure is! Same idea as the Gen2, the battery tray is just a touch different.
Similar threads
