Gen 3 Circuit Race

[NZ Racer]

Just a bit of fun really... Well hopefully

This site has been really helpful so I thought I would post my progress. I have done about 20 mins riding on the bike and in stock trim I was about 20 secs a lap slower than what I can do on my GSXR1000.

I struggled with the delay in the throttle and the lack of feel with the rubber mounted bars and pegs plus the high bars and low seat.

I have put brembo master cylinders on to help the brakes, LSL clip on bars to delete the rubber mounts and put my weight further forward, vortex rearsets, replaced seat foam, high screen, yoshi throttle, 520 chain and sprockets, sprint filter, velocity stacks, yoshi exhaust, Bridgestone Slicks and a woolich flashed ecu.

Ohlins are building some FKR forks and TTX shock but for this weekend I will race with standard suspension. Not expecting anything except test laps because we can't get much track time for testing in New Zealand.

 

[Cantab]

Im sure you'll have it sorted for December racing eh

 

[Vanishing Point]

All AHC Members follow you , good luck on track .
Glad you swap the MC to Brembo RCS

 

[Bumblebee]

Just a bit of fun really... Well hopefully

This site has been really helpful so I thought I would post my progress. I have done about 20 mins riding on the bike and in stock trim I was about 20 secs a lap slower than what I can do on my GSXR1000.

I struggled with the delay in the throttle and the lack of feel with the rubber mounted bars and pegs plus the high bars and low seat.

I have put brembo master cylinders on to help the brakes, LSL clip on bars to delete the rubber mounts and put my weight further forward, vortex rearsets, replaced seat foam, high screen, yoshi throttle, 520 chain and sprockets, sprint filter, velocity stacks, yoshi exhaust, Bridgestone Slicks and a woolich flashed ecu.

Ohlins are building some FKR forks and TTX shock but for this weekend I will race with standard suspension. Not expecting anything except test laps because we can't get much track time for testing in New Zealand.

View attachment 1655467

View attachment 1655468

We will all be awaiting a few You Tube videos of your tearing up the track on the beastie....

@Ac41 is another serious (Gen 2) track rider...

 

[Ked0607]

@NZ Racer Whats this yoshi throttle you mentioned? Any photos of it? Just curious what you are reffering too. Also how do you like the brembo master on it? What part # fit?

 

[sixpack577]

I think he's talking about Yoshimura Japan's quick turn throttle on WebBike.

 

[ZeePopo]

Just a bit of fun really... Well hopefully

This site has been really helpful so I thought I would post my progress. I have done about 20 mins riding on the bike and in stock trim I was about 20 secs a lap slower than what I can do on my GSXR1000.

I struggled with the delay in the throttle and the lack of feel with the rubber mounted bars and pegs plus the high bars and low seat.

I have put brembo master cylinders on to help the brakes, LSL clip on bars to delete the rubber mounts and put my weight further forward, vortex rearsets, replaced seat foam, high screen, yoshi throttle, 520 chain and sprockets, sprint filter, velocity stacks, yoshi exhaust, Bridgestone Slicks and a woolich flashed ecu.

Ohlins are building some FKR forks and TTX shock but for this weekend I will race with standard suspension. Not expecting anything except test laps because we can't get much track time for testing in New Zealand.

View attachment 1655467

View attachment 1655468

Which FKR are you getting?