Got me a TIC-1000

TurboProstreet

Registered
Well i recieved one of the first TIC-1000 with ignition kill, and am installing on a 06 Busa. As always the packaging is tidey and ready for installation. I opted for the assembled coil harness. After you put power to the box all the instructions and wiring diagrahms are right there to be had on the screen. The install was no different then installing and Ign. module, shift minder, and air shifter except everything was in one easy box!!! And the adjustability for each item in the box is amazing.
I'll start the bike in the morning and try some of the functions out!

low3.jpg

coils1.jpg

mount3.jpg

dash1.jpg



-
 
Here's the product add/post:

Drop down menu so you can select your bike.
Programmed for hayabusa, gsxr1000, zx10,zx9r,zx12, and zx14

Can be manually configured to work with most applications if one is not on the drop down menu.

Connects directly to crank trigger wires via supplied connectors.

On screen wiring and pin out

On screen instructions

ignition timing retard based on boost pressure or gear

anti lag- for spooling a turbo up/ progressive application

2 step- NLR exclusive

programmable shift kill per gear! 1 miili second increments!

programmble shift light output rpm per gear!

Programmable launch light output(when clutch is in and rpm window is met)

Auto shift

dedicated shift solenoid output

Power reduction timer- Pull timing out at the starting line via the anti lag function. Program a time. When you release the clutch input the timing will go from the retarded amount to full advance in the specified amount of time. Great for those grudge bikes!

polarity programmable inputs! NO relays needed.

The kit comes complete with TIC-1000 control unit, IKU-1 kill unit, harness and instruction manual.

1 box for the controls and 1 box for the loads the coils will see.
 
(Moparict @ Jan. 13 2007,19:30) Not to sound like an idiot, OK maybe, but what is it???
For us ignant folk, answer the man's question: what the hell is it? In laymens terms please.
 
Ooooooooooook! It's a fully, completely, easily, and infinitely programmable shift light, engine kill, progressive ignition, two step, anti lag, and auto shift for motorcycles!


-
 
(TurboProstreet @ Jan. 14 2007,07:32) Ooooooooooook! It's a fully, completely, easily, and infinitely programmable shift light, engine kill, progressive ignition, two step, anti lag, and auto shift for  motorcycles!


-
wow.gif
 
I know this is a very old post. Does anyone have the installation instructions for these?
TIC-1000 and IKU-1 Kill Box.

I emailed NLR but was told that they stopped making these 15 years ago and don't have the instructions.

Thanks
Mark.
 
I know this is a very old post. Does anyone have the installation instructions for these?
TIC-1000 and IKU-1 Kill Box.

I emailed NLR but was told that they stopped making these 15 years ago and don't have the instructions.

Thanks
Mark.
Don’t have the instructions?? Seems odd to me !
 
Back
Top