Hayabusa Gen 3 XDF File

[DanCycles]

Hi Guys, here is a XDF file for TunerPro, so you can make changes to your ECU for free.
You just need a way to flash the bike, im working on my own flashing tool for free, but it will take a while, but if you have something like a KESS, New Genius or Transdata, you can do it yourself.
Have fun!

 

[Busa Quick]

I downloaded Tuner Pro (easy enough).
I then looked at your definition file, it looks about right from what I have seen in the past.
From what I can tell, I still need a .bin file from the Gen 3 Hayabusa to inspect. Is that correct?
Do you have a stock .bin file, or know where to find one?

The other note, Tuner Pro looks a little like the older IDA Pro. Are you familiar?

Thanks for the file!
Mark

 

[DanCycles]

I downloaded Tuner Pro (easy enough).
I then looked at your definition file, it looks about right from what I have seen in the past.
From what I can tell, I still need a .bin file from the Gen 3 Hayabusa to inspect. Is that correct?
Do you have a stock .bin file, or know where to find one?

The other note, Tuner Pro looks a little like the older IDA Pro. Are you familiar?

Thanks for the file!
Mark

You can download the bin file here on my GitHub page

GitHub - DanCycles/HayabusaGen3

Contribute to DanCycles/HayabusaGen3 development by creating an account on GitHub.

github.com

Yeah, I’m currently trying to reverse engineer the RH850 microchip on ghidra to add turbo maps on the stock ecu.

I’m not very good at assembly so it will be a learning curve until I get everything figured out

 

[Cruising180]

I had EVOScan and a Tactrix 2.0 cable to flash my old 2009 Lancer Ralliart I used to have. I loved being able to download a base map and flash my own car. I was also able to unlock the Super TC-SST trans logic like the Evo MR runs. The Ralliart had the same DCT transmission as the MR but had the good tune locked up. Imagine the possibilities if we had something like a Tractrix or Accessport for motorcycles.