Hybrids '05 HyboOsa build
- Thread starter Hybrid1300R
- Start date
busa barmy
Registered
Hi there hybrid
The busa fighters looking good , im doing something simlar with my 2000 busa , looking at the headlight already .
Do you by any chance know any decent places to get a belly pan from , also i have black down pipes do you think they would pollish up ?
And also where i could get some clocks that would plug straight into the busa analogoe or digital , was going to keep the originals but maybe a bit big with that headlight .
Any help would be great .
Regards paul
The busa fighters looking good , im doing something simlar with my 2000 busa , looking at the headlight already .
Do you by any chance know any decent places to get a belly pan from , also i have black down pipes do you think they would pollish up ?
And also where i could get some clocks that would plug straight into the busa analogoe or digital , was going to keep the originals but maybe a bit big with that headlight .
Any help would be great .
Regards paul
Hybrid1300R
Registered
Hi Paul,
Here is a place you will be able to find a bellypan and a few other cool parts: Hayabusa GSX-R 1300 Accessories. StreetFighters Inc. One stop shopping for GSXR 1300/Hayabusa Accessories.. As for the black down pipes, if they are stock, then no they will not polish up, if it is aftermarket, it depends on if it is made out of stainless or not. Well, as for the clocks, I do not know of any that plug straight into the busa harness. I hope this helps.
Tom
busa barmy
Registered
Hi tom .
Cheers for that will take a look , i will keep an eye on all your modifications aswell , might get some more ideas .
Regards paul
Cheers for that will take a look , i will keep an eye on all your modifications aswell , might get some more ideas .
Regards paul
busa barmy
Registered
Tom , what front mudguard are have or you thinking of putting on ?
do you know any that will fit straight on ?
regards paul .
do you know any that will fit straight on ?
regards paul .
Hybrid1300R
Registered
Paul, if you look on that link I gave you earlier, they have about 4 or 5 different mudguards on there. Me personally, I have gone with an 01-03 GSXR750 forks and mudguard. That site wants quite a bit of money for the mudguards and I got the forks and mudguard for less than what they wanted for the busa mudguard. The wheel, rotors, and axle slots right in. I did have to buy some new brake calipers, but that was not a real problem.
Last edited:
Piscataway Busa
Registered
those rear sets are sick
Hybrid1300R
Registered
Thanks, I really like them, they are very high quality, eventhough I got them from Taiwan or somewhere over there.
busa barmy
Registered
Hi tom ,
Sorry to bother you again m8y, i was wonering how you are mounting your handle bars on to the top yoke ? I was going to get a nice shiney new yoke but have just noticed that yours are on the origional one , any pics or help would be great , if you can will you send the pics / help to paulwalker834@hotmail.com or just post them on here and i will have a look .
Kind regards paul.
Sorry to bother you again m8y, i was wonering how you are mounting your handle bars on to the top yoke ? I was going to get a nice shiney new yoke but have just noticed that yours are on the origional one , any pics or help would be great , if you can will you send the pics / help to paulwalker834@hotmail.com or just post them on here and i will have a look .
Kind regards paul.
Hybrid1300R
Registered
Hey Paul,
Sorry I have not answered back, I have been spending alot of time in the garage. I have the LSL Superbike kit that bolts to the original top clamp. I have swapped to a GSXR 750 set of yokes, if you are interested, that top clamp is for sale. I will let it go for $175, new they are $350 plus new. Let me know if you are interested.
Hybrid1300R
Registered
Well, as money has run out and time is short for me to have it rideable by the first of october, I cannot get the frame, swinger, and wheels powdercoated, so I have resorted to the old stand by.
and a little teaser
I am waiting to see how the red paint goes with the polish as to whether I powdercoat the frame and stuff.
and a little teaser
I am waiting to see how the red paint goes with the polish as to whether I powdercoat the frame and stuff.
KappaSigBusa
Registered
Hybrid1300R
Registered
Did some primering today and will do some more tomorrow. Hopefully I will have the paint done by Wednesday. Will post pics of course.
KOTH
Registered
Hey man, just leave it primered, hand paint some brass knuckles on the tank, slap on some bullet hole stickers and you are good to go.
KappaSigBusa
Registered
can't wait to see the finished product
InfiniteReality
Registered
Adding to this list, can't wait to see the finished product!!
