Greenbean
Registered
Thanks so much for the tips...We use a combination of dish soap and water for applying window tint... in a spray bottle (12 ounces) just add 4 or 5 drops of dawn dish soap..
make sure your application area is spotless and the spray it with the solution
on the decal.. as you peel the backing, use the same solution and spray the adhesive side as you pull the backing.. this will keep any dirt from sticking.. (this all needs to be done on a spotless clean surface) you can then take the wet decal, lay it on the wet fairing and move it around to where you want it..
After you are SURE of placement, use a rubber squeegee (body shop type works fine, not a window cleaner type) and squeege the water out from the center of the decal with light strokes...
IF in doubt about this go to a decal shop or a window tinter and have them do it... will look good as new..
I'll post when I get it done...