I need a pc3r map

hey cache how close are u to nash,tn going to have a pro bike shootout on the 31st think it 2k for pro mod and 1k for street.
 
add 5 degree at 2-5-10-20% throttle in the 2-4K cells
in the 100% throttle take out 1 degree in the 4-11K cells

This is for a PC3R only with NO  TRE
JohnnyCheese...

I assume you are talking about the Ignition Table on the PCIIIr.

:super:

Sorry for the dumb Q, I don't know anything about this stuff... But, try asking me something about databases, programming, or PCs in general! I had to spit that out to keep a hair of my manhood.

Thanks, Rip.
 
add 5 degree at 2-5-10-20% throttle in the 2-4K cells
in the 100% throttle take out 1 degree in the 4-11K cells

This is for a PC3R only with NO  TRE
JohnnyCheese...

I assume you are talking about the Ignition Table on the PCIIIr.

:super:

Sorry for the dumb Q, I don't know anything about this stuff...  But, try asking me something about databases, programming, or PCs in general!  I had to spit that out to keep a hair of my manhood.

Thanks, Rip.
Johnnycheese,

Is that just placing the #5 and #-1 in the cells that your referring to...Or is it more to it than that...
 
done. I will go for a test ride a little later.

BTW - What exactly will this do? Make it perform better, smoother response, something else?

Thanks again, Vaughn.
 
I thought about disconnecting mine until I get the map made.... BUT!!!!
it is so much smoother through the rpms, has my et's very consistent. need that for this coming saturday....  $500 to first place in superbike competition. last time was only 10 bikes for that series. $1000 for pro mod first place!
wish me luck.................
welll?:super:??? results?:super:
results?

before the pc3r, my good times were speratic (SP?) at 9.72, 9.73, but not consistent.

This weekend, I ran EVERY run within 15 tenths of eachother...
9.86, 9.87, 9.86, etc. with - tADA... 1.596 60' !!!!!!!!
Not as fast, but VERY consistent. THat will win bracket racing.

Once it is properly tuned, it will be in the mid 6's AND consistent.


As I said, this Saturday is the money race. The power commander will help a TON. Consistency wins.

thanks j.c. for spending your time with us here.
My tuning will be done in 3 weeks. I race this wknd, my bud/tuner races the following wknd, after that we will do it.
 
add 5 degree at 2-5-10-20% throttle in the 2-4K cells
in the 100% throttle take out 1 degree in the 4-11K cells

This is for a PC3R only with NO  TRE
Johnny,

I could see this working well for the gears that are restricted, but wouldn't this throw off the ignition timing when you are in the gears that Suzuki doesn't restrict; 4-6? or is it 5-6? Let me know what you think...

Also, have you tried adding 5 degrees up to 40% throttle? How did that work for you if you did?

thanks!
 
I thought about disconnecting mine until I get the map made.... BUT!!!!
it is so much smoother through the rpms, has my et's very consistent. need that for this coming saturday....  $500 to first place in superbike competition. last time was only 10 bikes for that series. $1000 for pro mod first place!
wish me luck.................
welll?
rock.gif
??? results?
rock.gif
results?

before the pc3r, my good times were speratic (SP?) at 9.72, 9.73, but not consistent.

This weekend, I ran EVERY run within 15 tenths of eachother...
9.86, 9.87, 9.86, etc. with - tADA... 1.596 60'  !!!!!!!!
Not as fast, but VERY consistent. THat will win bracket racing.

Once it is properly tuned, it will be in the mid 6's AND consistent.


As I said, this Saturday is the money race. The power commander will help a TON. Consistency wins.

thanks j.c. for spending your time with us here.
My tuning will be done in 3 weeks. I race this wknd, my bud/tuner races the following wknd, after that we will do it.
Did you ever get your map? We have the same setup for the most part.

rock.gif
 
Johnny , I need your help with a map for my new bike. What info do you need ? 04 busa ,Leo vince full hi mount , k&n filter . Should I do an airbox mod ?
rock.gif
 
Back
Top