i need a tail light connector....

[eaglebusa]

as per my previos post....https://www.hayabusa.org/forums/?act=ST;f=46;t=96342
l'm having issues with my tail lights, i removed a trailer harness(don't know why they had one in it to begin with) and my local dealer doesn't even know the problem.
i was hoping to get a wire connector from someone on this board(preferably with the wires still attached(so i can figure out the colors easy) because my service manual's wire colors aren't even close to my actual wire colors.

DOES ANYONE HERE HAVE A WIRE CONNECTOR THAT THEY WOULD LIKE TO PART WITH?
(maybe you did a tail light swap?)

thank you in advance.....

 

[tampaboy813]

they installed the trailer box to make the rear lights work as blinkers...I am about to do this mod to my bike..I will get back with you tomorrow..

 

[eaglebusa]

i was thinking this later too. i have LED signals for the fron and a new smoked led tail light, i just wanted to get my electrical all straightened out before i installed them.... so i have to put one back in? i can do that.

does anyone have any reason why when i apply my brake one of my front marker stays on(over-riding my signal i may have on)?

do i need 4 wires or 5 wires coming out of the trailer harness?

 

[tampaboy813]

i was thinking this later too. i have LED signals for the fron and a new smoked led tail light, i just wanted to get my electrical all straightened out before i installed them.... so i have to put one back in? i can do that.

does anyone have any reason why when i apply my brake one of my front marker stays on(over-riding my signal i may have on)?

do i need 4 wires or 5 wires coming out of the trailer harness?

The Plug needs to have 5 wires going in the box and 4 coming out...they only have right, left, parking & Grd...when you press the brk the box makes the left & right work @ the same time to make the brk light...I just did the mod but I did not cut my plug on the bike side...

 

[eaglebusa]

i got it all straightened out.... works like new...thanks alot!

 

[tampaboy813]

i got it all straightened out.... works like new...thanks alot!

good deal...I like mine as well...