i want 200 hp any sugestions?
- Thread starter TATS4U75
- Start date
H2447INTX
Registered
^^^^^^^^^^^^^^
ok i see that but im still not sure,, look at the post above , 1397cc its just at 200hp
i guess its really where you see the hp , at the motor or at the wheel
i am not saying it cant be done just that i have been followeing a few buids , couse i am looking to someday do a 1441 ,, any how the hp i see on cc builds are not to far over 200, so i just dont see how you get 200 hp out of a gen1 with just head work,,
best of luck to him if he can do it good for him !
ok i see that but im still not sure,, look at the post above , 1397cc its just at 200hp
i guess its really where you see the hp , at the motor or at the wheel
i am not saying it cant be done just that i have been followeing a few buids , couse i am looking to someday do a 1441 ,, any how the hp i see on cc builds are not to far over 200, so i just dont see how you get 200 hp out of a gen1 with just head work,,
best of luck to him if he can do it good for him !
H2447INTX
Registered
ahh.. it appears i am mistaken. called a local shop owner here with a dyno who claims his stock k8 makes 180, and 200 with full exhaust, filter and tuning..
maybe his dyno is loose
that is not a realistick hp # on a gen2 with just exhuast and filter ,,
my bike 2009 full exhaust, filter , cheese tune and i was pushing 187 mhp,, with the extended arm i am fig i am still pushing about 178+-,,
a few members i know have ceramic wheel brgs, sealed duck tubes , exhaust ex and they are in the 190,,
so when people say you can get a gen1 to 200hp on just head work, port polish i just dont see it ,,
if he wants 200 he will need n2o or a turbo, or big bore kit +
heads will not do it alone
Gixx1300R
Registered
You are forgetting part of the equation. Is it possible to get 200hp from a Gen one with just head work,tune,exhaust and cams? Is it possible to get 200hp on a Gen 2 with an exhaust, tune and filter. Yes it is if you run race fuel. That can be the difference in the equation. All of the bikes that I build are dynoed with 93 octane to get a real base line. Race fuel is added later for spraying and N/A horsepower. Some race fuels can give 10 to 20 hp.
Look up GSXRHP, he will get you in line!
Posted via Mobile Device
Posted via Mobile Device
I literally just drowled.....
89 or 91 will give you more power than 93 anyway, they are more explosive by nature. Just watch for the PING.
Similar threads
