its here

[BigRod1300]

OK finally a sound clip.  Lets try this.

OK...what the.... following errors. Video/3gpp, is either unregistered or not allowed.

What does this mean? Video was taken with cell phone.

 

[thebbbusa]

OK finally a sound clip.  Lets try this.

OK...what the.... following errors.  Video/3gpp, is either unregistered or not allowed.  

 What does this mean?  Video was taken with cell phone.

You can't upload videos directly to this site like you can with photos. You need to upload it to some other photo/video sharing site. There are many different ones out there.

Some may not use the format from your cell phone.

Good luck.

 

[HD DUDE]

Nice work dude.  This is what I have been looking into for about 6 months now.  Thanks for all your post.

My question is how did you decide on the C&S swingarm over all the other choices like Roaring Toyz, McIntosh, Trac Dynamics etc.  This is my single biggest question.  I'm looking into the single sided CSC Swingarm.

CSC 330 Link

Did you look at doing this?  I just need to ask people like you that have done the conversion & if I ask enough I'll work it out I guess.

I have also picked out the Dapincci Air Ride for my conversion.  Look forward to your reply mate.

 

[BigRod1300]

I had looked around at the single side arms...but I like everything balanced, like dual exhaust. Singel is sweet but lacks that race look I was after. Roaring toyz..

. To keep it simple: as far as I know they do NOT make an arm, they just put their name on the ones they sell. They get them from others like: C&S, murtle west, and ect. MY orignal order was thru Roaring, but after the WRONG one coming in and then them not reordering ( after 5 weeks to find this out, 12 week wait total with them ). Dont get me wrong I have ordered other things from them...great product parts, but getting the arm from them

. I went strait to C&S..arm and wheels all in 5 weeks.

The C&S...sweet..I wanted the arrow point on the block ends.

My wife was cleaning the H3 this weekend and got to close to the bike and scratched her leg on those points.

You'll find that there are only a couple arms out there, but many sell them with their names. Do your research and pay attention when looking at them...you will start to notice how makes what arm.

 

[BigRod1300]

Hosted SOUND CLIP..lets try this
http://www.putfile.com/bigrod1300

 

[Bigger-Busa]

EXCELLENT JOB, NICE WRITE UP!
is that exhaust adjustable?

 

[Bigger-Busa]

You may want to add gages to your air ride to be exactly sure you are set correctly. These digital gages show lift pressure and rebound pressure.
To bouncy a ride into a corner is excitement i'm not interested in,

There is an entire write on of my building my 2006 Busa 330 kit on the Modification board.
(Update: reread your posts and see you already have gages, nice set up!)

 

[HD DUDE]

Hey Bigger-busa, did you ever sell yours or is she still in the stable mate?

If you decide to sell yours BigRod1300 post it up. It may just be a better way of getting mine done in one go as you have put together a bike in line with what I intend to build in the very near future.

 

[BigRod1300]

EXCELLENT JOB, NICE WRITE UP!
is that exhaust adjustable?

ADJUSTABLE exhaust?

 

[BigRod1300]

You may want to add gages to your air ride to be exactly sure you are set correctly. These digital gages show lift pressure and rebound pressure.
To bouncy a ride into a corner is excitement i'm not interested in,  

There is an entire write on of my building my 2006 Busa 330 kit on the Modification board.
(Update: reread your posts and see you already have gages, nice set up!)

I ve seen you write up

. If you have looked and ready my entire post you would have seen that I do have guages for the air Settings.

 

[Bigger-Busa]

You may want to add gages to your air ride to be exactly sure you are set correctly. These digital gages show lift pressure and rebound pressure.
To bouncy a ride into a corner is excitement i'm not interested in,

There is an entire write on of my building my 2006 Busa 330 kit on the Modification board.
(Update: reread your posts and see you already have gages, nice set up!)

I ve seen you write up

. If you have looked and ready my entire post you would have seen that I do have guages for the air Settings.

Wow! You do great work my friend! That is awesome.
im on a super tite budget and gotta save penny's where ever i can.

 

[Bigger-Busa]

EXCELLENT JOB, NICE WRITE UP!
is that exhaust adjustable?

ADJUSTABLE exhaust?

I was wondering if it was like the new Roaring Toyz exhaust that you can adjust louder or quieter but i read over his 4 page write up and see now that he custom redesigned the cans. He does great work, cool video and sound bit as well.

 

[Bigger-Busa]

Hey Bigger-busa, did you ever sell yours or is she still in the stable mate?

If you decide to sell yours BigRod1300 post it up. It may just be a better way of getting mine done in one go as you have put together a bike in line with what I intend to build in the very near future.

Nope, didnt sell it yet. wanna hang on to it as long as i can.

 

[NCpanther01]

that's HOTTT!!

 

[BigRod1300]

dapincci is a great company. One week sending my air piston to them, one week for them to check it out ( yes internal leak ), another week and I now have a new piston from them. Put it on the bike last night and the bike is high in the air and did not leak down over night.

Ready to ride

 

[BigRod1300]

some up dated pics.

 

[BigRod1300]

next

 

[BigRod1300]

another

 

[BigRod1300]

last one

 

[lil basscrazy]

that is one bad ass bike