looking to get a 4 to 1 system

[DR1300R]

Yoshimura Suzuki Racing..

 

[StVNQN]

I went with the Arata ti I had the Yosh stainless and gave it and pc3r to my son. The Arata has more low and Mid.

 

[Macco]

Fitted a full-race Akrapovic carbon to my 2004 Busa. What a delightful improvement. The sound is magnificent. The workmanship, and quality is really top class, with all fasteners fitting exactly as the originals. Flaring and welding of the header flanges are possibly the best around. My bike shop mechs have said it was one of the easiest mod they have done.

 

[busawild]

Yeah I would have to agree with Macco.I have the same Akro Evo system on mine and it awsome.I've had most of the others when it comes to exhausts and AKRAPOVIC seems to be built better with great performance.Usually on exhuasts though,you get what you pay for. If your looking for stealth though,none of these exhausts are going to work.Stock for stealth,and after market for performance thats how it is.



<!--EDIT|busawild
Reason for Edit: None given...|1104283114 -->

 

[MTRHD101]

I have a full Yosh TRS system and it sounds great, quite at idle and part throttle, nice and clean at higher revs but not too loud.. I have the carbon can and the fit and finish is supurb.. I think Yosh makes as good a stuff as anyone for the dollar..

 

[pravataracing]

can someone give me the web site for veltune & johnny cheese pleaseeeee:blush:

 

[BigBSBusa]

can someone give me the web site for veltune & johnny cheese pleaseeeee:blush:

You can PM both of them from here Tom (WarBaby) or Johnny (JohnnyCheese). Tom does have a website <a href="http://www.veltune.com">Veltune<a>, but Johnny doesn't.

 

[HiYaBruceA]

My BDE/Hindle street megaphone system is on its way from Veltune (url = veltune.com), with the PAIR removal kit and PCIIIR with the '04 busa map. I'll have my dealer install it and do the airbox mods. I may have the megaphone, external pipe and bracket ceramic coated, possibly satin black. Since those two ugly cans will be gone, so too must the ugly external turn signals, to be replaced by a clear lens integrated unit. I got clear front turn signals as well, had to make them the same as the rear. After all this is done I'll send pics, provided I haven't screwed the bike up!

 

[Smoke_Dog]

Go to this link/subject on page 2(exhaust Pref) of this Topic area or click this link:




<!--EDIT|Smoke_Dog
Reason for Edit: None given...|1106173651 -->

 

[fstbusa]

I run a carbon can BDE..... very sweet sounding... one of the most hp pipes also.

 

[HiYaBruceA]

I just had the BDE Hindle Street Megaphone Gen3 system installed and it is not quiet. It raises hell and as a former Harley owner I like that. I was stopped at a traffic light no more than 1/2 mile from the dealer after he installed it, when I heard repeated horn honks. It was two young bucks just lovin' the sound. The driver stuck his arm out of the window and gave the familar twist of the wrist for more noise. I happily obliged!

 

[Blpnther]

Depends on what you are trying to do. IF you are just looking to remain "stealth" then don't change your pipe. If you are looking for horsepower then start with Brock, Ti Force, Akra, Muzzy for more hpw.

Just noise...go with the rest...

 

[BusaFever]

If you want quiet, go BDE. Muzzy, HMF, and Akra are all louder.

 

[manatrader]

I asked the same questions as you did and ended up with the BDE. It all comes down to how loud you want to be and the color of the bike and how you want to match up. Good luck, if you do the full system do the PC III too!

 

[jarim]

A vote for Yoshimura 4-2-1.

 

[Pop]

A vote for Yoshimura 4-2-1.

That is what I just got!