BigBadDodge
Registered
First up decided to get rid of my homemade muffler on the dodge and run a straight pipe. When i bought it it was dumped straight down, i rotated it to give it some angle but it always looked like the truck had a weiner.
Delete pipe with same turndown pipe painted
ended up turning it to exit the side and put a bit more pipe on(was working off scrap so thats all i had) hoping it will keep everything under the back of the truck from being covered in soot till i redo it again to something else
Looks alot cleaner and sounds great!
Now onto my buddies harley
This is what we started with, bottom pipe was worn through at the end and center, sounded like absolute hell and had a pretty nasty flat spot in the rpm range
Started tacking up his new 2-1
Have to cut the flanges down a bit to clear the heads since its pretty tight now being 1 assembly, originally were gonna do a d+d bobcat style muffler(was gonna shorten one of my factory busa cans) but he thinks it will look better dumped, going to bring the pipe size up and make a cool slash cut (think jesse james style) exit ,neighbor has 2 cone baffles he had put on his bike and didnt like how it sounded so were gonna try putting one of those in for the sake of a bit of backpressure.
Delete pipe with same turndown pipe painted
ended up turning it to exit the side and put a bit more pipe on(was working off scrap so thats all i had) hoping it will keep everything under the back of the truck from being covered in soot till i redo it again to something else
Looks alot cleaner and sounds great!
Now onto my buddies harley
This is what we started with, bottom pipe was worn through at the end and center, sounded like absolute hell and had a pretty nasty flat spot in the rpm range
Started tacking up his new 2-1
Have to cut the flanges down a bit to clear the heads since its pretty tight now being 1 assembly, originally were gonna do a d+d bobcat style muffler(was gonna shorten one of my factory busa cans) but he thinks it will look better dumped, going to bring the pipe size up and make a cool slash cut (think jesse james style) exit ,neighbor has 2 cone baffles he had put on his bike and didnt like how it sounded so were gonna try putting one of those in for the sake of a bit of backpressure.
