managed to get the motor out(vid)

[icemansid]

That's why you go with somebody that everybody can reccomend.
Posted via Mobile Device

 

[icemansid]

Robinson Industries

very highly recoemmended. He will only charge you for what actually needs to be done and has replacement parts if needed.

 

[GIXERHP]

i hear you but some times you get ripped off like that,they say you need a new this and that when you really didn't need it.

I have sent all my tranny's to Fast By Gast, and have all ways had a great outcome!
Most of the time, your gears can be repaired, with no need to replace them.
They have a great turn around time, with great service!
The last too i sent them, i sent every thing, and told them to completely inspect everything!
There site link is here, Fast By Gast - High Performance Motorcycle Parts

Also im building 6 motors this winter, and all of the tranny's are going there!

 

[BlueHaya]

FBG is who I used as well. I felt like I was treated very fairly and they know their stuff.

 

[ham4864]

just some update vid of the progress

 

[Nicholas]

i replaced my 2nd gear... and now my first gear is slipping..... not sure if it was something i did when putting everything back together or not... but a shop told me i should have changed my shift drum as well..... but all other gears are perfect except 1st

 

[ham4864]

did you change the shift forks were they worn.

 

[mountainmotor]

There are two sides on the C clips. One side is flat,the other side more or less beveled. Make certain they are oriented correctly on installation.

 

[RedFalco]

just some update vid of the progress

Nice Video Ham. Need to get into the "How to video market".
I'd take one on a "Head gasket replcmnt" instruction please..


I'm looking forward to checking out your winter progression.

 

[ham4864]

i may show how the tranns is taken apart and put back together.but i want a hi def camera first.

 

[ham4864]

mountainmotor explain this to me i don't quite understand this illustration

 

[Nicholas]

did you change the shift forks were they worn.

i did replace the one that was worn

 

[GIXERHP]

i did replace the one that was worn

If you had a worn one you may have had a bent one also!

 

[Nicholas]

If you had a worn one you may have had a bent one also!

i layed the other ones on a table and from what i could see they wasnt bent

 

[ham4864]

hey hey no thread jacking

 

[mountainmotor]

mountainmotor explain this to me i don't quite understand this illustration

Means the flat side of the clip away from any gear or spacer.

It's been awhile but two clips go one way , the third clip opposite of them on that particular shaft.

Don't feel bad. Thats a poor illustration for sure.

 

[mountainmotor]

So , you about have it going your way ?

 

[Nicholas]

hey hey no thread jacking

yea i know sorry, but i have no idea why my first gear is slipping now and figured that since i did the same thing someone else might have had the same problem after putting theirs back together?

 

[piratediverjefff]

just some update vid of the progress