Marble needed for at2?

[SpearrowsPearl]

I received my yoshimura AT2 for my 2022. I was looking at posts on here and a marble is mentioned but these where on the gen 2 and 1. Will I need to do this also? Thanks.

 

[SS4Luck]

Don’t do it a hack ass way.

Get a vacuum cap from an auto part store. I believe you’ll need a 5/8. You can get a pair valve sim and plates from boost by smith.

 

[SS4Luck]

Pair Valve Eliminator Connector for 08-Current Hayabusa

Get rid of the octopus looking solenoid sitting on top of your valve cover if you have already done the pair blockoff mod.

boostbysmith.com

 

[pcs]

looks like this

 

[SpearrowsPearl]

Don’t do it a hack ass way.

Get a vacuum cap from an auto part store. I believe you’ll need a 5/8. You can get a pair valve sim and plates from boost by smith.

Thank you

 

[SpearrowsPearl]

Pair Valve Eliminator Connector for 08-Current Hayabusa

Get rid of the octopus looking solenoid sitting on top of your valve cover if you have already done the pair blockoff mod.

boostbysmith.com

What will I need the pair system delete for? This is my first big bike. I see people doing it on this forum but I'm not sure why I should do it.

 

[Bumblebee]

What will I need the pair system delete for? This is my first big bike. I see people doing it on this forum but I'm not sure why I should do it.

People put the PAIR eliminator kit in to stop the snap. crackle and pop when they put an aftermarket system on and eliminate the cats....

I have a new one in my garage that I have yet to put in...I kind of like the pops and bangs sometimes....

 

[SpearrowsPearl]

People put the PAIR eliminator kit in to stop the snap. crackle and pop when they put an aftermarket system on and eliminate the cats....

I have a new one in my garage that I have yet to put in...I kind of like the pops and bangs sometimes....

Thank you for the explanation. I'm going to order this kit from boostbysmith.

 

[Dopey]

I received my yoshimura AT2 for my 2022. I was looking at posts on here and a marble is mentioned but these where on the gen 2 and 1. Will I need to do this also? Thanks.

Don’t do it a hack ass way.

Get a vacuum cap from an auto part store. I believe you’ll need a 5/8. You can get a pair valve sim and plates from boost by smith.

Nothing wrong with doing the marble mod, while it might not be the correct way it does what it need to and for someone not comfortable with working on the bike or didn't have the funds available for the block off plates is nice to have an option. @SpearrowsPearl I had the marble mod done to my gen 2 for a short time after installing my alpha t exhaust but I decided I liked the popping and flames I got without it so I pulled it back out, this is another nice thing about using the marble since you can test before doing the block off plates. Without the marble the popping isn't too extreme at least with my gen2, definitely nothing like the moore mafia pops and bangs tune . But the marble mod stop most of it so maybe try it with and without and see what you like best.

 

[SpearrowsPearl]

Nothing wrong with doing the marble mod, while it might not be the correct way it does what it need to and for someone not comfortable with working on the bike or didn't have the funds available for the block off plates is nice to have an option. @SpearrowsPearl I had the marble mod done to my gen 2 for a short time after installing my alpha t exhaust but I decided I liked the popping and flames I got without it so I pulled it back out, this is another nice thing about using the marble since you can test before doing the block off plates. Without the marble the popping isn't too extreme at least with my gen2, definitely nothing like the moore mafia pops and bangs tune . But the marble mod stop most of it so maybe try it with and without and see what you like best.

Thanks man, I ordered the whole kit from boostbysmith . It was 50 bucks. Today after work I'm putting the exhaust on. The kit from boost by Smith won't be here till Monday so I will install the kit when it arrives.