Military base sticker on busa

[gwhunran]

i just got my metal tags for the new busa, so now i can get base stickers for it. on my old gs1000 i just put them on the left fork so the gate guard could just look down and see it. where are you guys putting the stickers on the busa? i kind of hate putting them in plain view on the busa because of the "looks" issue, not such a concern on the old gs.

richard

 

[MC MUSTANG]

Mine is on a bracket off of my outer left fork pinch bolt.
****I never pass up an opportunity to post a pic of Bessie*****

 

[gwhunran]

mc,

good looking bike. mine is blue/silver too.  i am sorry to say that the left side is pretty scratched up now. i will have the scratched left fairing replaced soon.  i will just have to live with the minor scratches on the center fairing and f. fender.  i might try covering those with touch up paint.

i don't think the 4 sickers we hav to use would fit where you hav yours.

richard

<!--EDIT|gwhunran
Reason for Edit: None given...|1141867121 -->

 

[Gunnybusa]

Mine is on a bracket off of my outer left fork pinch bolt.
****I never pass up an opportunity to post a pic of Bessie*****

Wheel chock and side stand down? You must get some strong winds down there

 

[davsbusa]

I put mine on the left innner fairing. Very easy to see. Not the greatest for looks, but will come off easy without scratching anything when I PCS.

 

[MC MUSTANG]

Mine is on a bracket off of my outer left fork pinch bolt.
****I never pass up an opportunity to post a pic of Bessie*****

Wheel chock and side stand down? You must get some strong winds down there  

Never too carefull there Big Daddy! There's a Hurricane a comin!

 

[MC MUSTANG]

I put mine on the left innner fairing. Very easy to see. Not the greatest for looks, but will come off easy without scratching anything when I PCS.

That was where I originally had mine, but I had to pull the stickers when I sent my inners in to be painted.

 

[Wire Dawg]

Mine are in the same place as MC MUSTANG. It'll work for your 4 stickers, just cut a little bigger piece of metal to mount them on.

 

[AK_Busa]

Mine is on a bracket off of my outer left fork pinch bolt.
****I never pass up an opportunity to post a pic of Bessie*****

Is your bracket zip tied to the fork? Hard to tell on the pic.

 

[MC MUSTANG]

Mine is on a bracket off of my outer left fork pinch bolt.
****I never pass up an opportunity to post a pic of Bessie*****

Is your bracket zip tied to the fork? Hard to tell on the pic.

No, the plastic is riveted onto a metal bracket that is held on by the outer pinch bolt.

 

[Professor]

I made a bracket and mounted it to my caliper bracket bolts by drilling them out a few thousandths and tapping them.

 

[mrninja9]

i took my sticker and got a magnetis sheet and put it on there and that way you can remove easy i used to have it on the gas tank then if you want you can just pull it off when out around town. i used to get in trouble by my supervisors alot so i didnt want anyont to think that i was military

 

[Sloto200]

I used the stock reflector bracket... took a piece of sheetmetal cut it to the size of the sticker and mounted it to the stock reflector bracket... only picture i got cause my camera battery just died taking it...

 

[Devious]

Mine is where it will show but I can remove it if needed with no damage...


David

 

[AK_Busa]

i  took  my sticker and got a magnetis sheet  and  put it on there  and that way  you  can  remove easy  i used to  have  it on the gas tank  then  if you want you can  just pull it off when out around town.  i used to get in trouble by  my supervisors  alot  so i didnt want anyont  to think that i was military

+1, thats what I have.

 

[Sloto200]

i  took  my sticker and got a magnetis sheet  and  put it on there  and that way  you  can  remove easy  i used to  have  it on the gas tank  then  if you want you can  just pull it off when out around town.  i used to get in trouble by  my supervisors  alot  so i didnt want anyont  to think that i was military

+1, thats what I have.

cant do that here... the cop will lean over and take it off and say hmm... weres your sticker... defeats the purpose of if being a sticker and it leaves it open for theft... not a good idea to have it on a magnet IMO...

 

[AK_Busa]

Mine is on a bracket off of my outer left fork pinch bolt.
****I never pass up an opportunity to post a pic of Bessie*****

Is your bracket zip tied to the fork? Hard to tell on the pic.

No, the plastic is riveted onto a metal bracket that is held on by the outer pinch bolt.

Can you please post some close up pics?

 

[AK_Busa]

i  took  my sticker and got a magnetis sheet  and  put it on there  and that way  you  can  remove easy  i used to  have  it on the gas tank  then  if you want you can  just pull it off when out around town.  i used to get in trouble by  my supervisors  alot  so i didnt want anyont  to think that i was military

+1, thats what I have.

cant do that here... the cop will lean over and take it off and say hmm... weres your sticker...   defeats the purpose of if being a sticker and it leaves it open for theft... not a good idea to have it on a magnet IMO...

just say ummmm "in your hand"