G
Guest
well after 3 months of working on my busa it has finally paid off.
OB_Johnnycheese
Registered
http://www.dragbike.com/news/08-00/080800a.htm
I like still prefer old copper top but I do like the Blue
I like still prefer old copper top but I do like the Blue
OB_Speeder T
Registered
I just check out your Busa before seeing this post. She is looking reall good !!!!!!!
OB_rick phillips
Registered
Nice Job!!! Could you post your dyno chart on Martin's site ?
OB_c_rod2000
Registered
yeah , nice. i think i asked before , how is that anodizing holding up on the clutch? no chipping ect. not to be biased but i think the fsmd undertail would look really sweet. i have on and a fender on my bike.it is extremley time consuming to put in (without scratching paint.)i am really interested in the anodizing though.
G
Guest
c-rod 2000 it is powder coating not anadizing this stuff is very durable,it is baked on with a clear coat that is baked on also. i can give you phone number for powder coater . it is a inexpensive modification
OB_THE MOTORHEAD
Registered
ok now your on a roll. good goin .
OB_c_rod2000
Registered
cool, e -mail me at crod2000@home.com. i would really like the number.
OB_blue one
Registered
busa2 bike looks good...was that you i talked to at norwalk sun?
G
Guest
blue one yes it was
Frank Adams
Registered
I like it.
You could have saved another 7pds if there was a TI-FORCE on it.
You could have saved another 7pds if there was a TI-FORCE on it.
OB_Hayabusero
Registered
Did you get those carbon fiber dash panels before they stopped making them, or are they making them again?
OB_busagringo
Registered
All I can say is WOW! You have a very impressive bike, I must say. I hope you don't mind me asking but how much have you invested so far on your busa in terms of cosmetics? Ride safe.
G
Guest
hayabusero- i received one of the first five sets they made.
busagringo-i'm scared to add up the totals but i'm sure its around $10,000. or more
numbnuts-not done yet, i've added mototeck gauges and clear turn signals
boneman- front fender came from yoyodyne $150.00
leemi-it didnt take any trunk space my installation is more detailed than they say to do i cut the plastic that goes down the side of the bike then i made 1/16 aluminum peices that go up into the fender and the plastic people that see it think it is stock i also powder coated the aluminum flat black to match the inner fender i still have the template if your interested
busagringo-i'm scared to add up the totals but i'm sure its around $10,000. or more
numbnuts-not done yet, i've added mototeck gauges and clear turn signals
boneman- front fender came from yoyodyne $150.00
leemi-it didnt take any trunk space my installation is more detailed than they say to do i cut the plastic that goes down the side of the bike then i made 1/16 aluminum peices that go up into the fender and the plastic people that see it think it is stock i also powder coated the aluminum flat black to match the inner fender i still have the template if your interested
OB_Bill Koz
Registered
Sweet Bike!!
Koz
Koz
OB_Cisco San Jose
Registered
Very good job and good weight savings,Ride safe.
OB_NumbNuts
Registered
Very nice piece of work busa2
Very nice. I do like your polished brake and clutch reservoir covers, sprocket cover and the polished undertray!!!
Have you finished it?? or are you tempted to do more??
(like paint it Black & charcoal
)
Nuts
Very nice. I do like your polished brake and clutch reservoir covers, sprocket cover and the polished undertray!!!
Have you finished it?? or are you tempted to do more??
(like paint it Black & charcoal
)Nuts
OB_boneman
Registered
Love the dymag's, but for the price I'd get a turbo. This is of course if I had that kind of mula to blow. But I can dream can't I?
Very tasteful mods dude, not to gawdy and just enought shine to stand out. Cherry.
Now you need the carbon rear wheel hugger with the chain gaurd built in.
I to had the same question as hayabusaaero about the carbon dash panels, what's the scoop on those? It may be something I can actually afford. The front fender was from Muzzy's too ehh?
Very tasteful mods dude, not to gawdy and just enought shine to stand out. Cherry.
Now you need the carbon rear wheel hugger with the chain gaurd built in.
I to had the same question as hayabusaaero about the carbon dash panels, what's the scoop on those? It may be something I can actually afford. The front fender was from Muzzy's too ehh?
Steve,
Nice bike. I think the oval carbon Muzzys look the best of any can on the Busa that I've seen but then I'm biased too. Great sound also. When you installed the fender eliminator did it "eliminate" the trunk space? How long did it take you and was drilling/cutting required? Thanks.
LeeMI
Nice bike. I think the oval carbon Muzzys look the best of any can on the Busa that I've seen but then I'm biased too. Great sound also. When you installed the fender eliminator did it "eliminate" the trunk space? How long did it take you and was drilling/cutting required? Thanks.
LeeMI
Similar threads
