My Very Slow Build

[michael parris heuberger]

Hi. The Gen 1 is still a maybe. I will know some time soon I hope I sold the Vulcan for $4500.00. The HD may be soon I hope. I will replace the vulcan with a 1300. Hondy for $1500.00 to $2000.00 Looking in to a 2006 HD Road King the dealer wants $6000.00 I what to offer $4500. to may be as hight as $5000.00.

Hi
I have $56000.00 set side for the busa the Honda if I get it will be for sail for $3200.00.

 

[sixpack577]

That is great news bro , if you are going to work for your daughter . Massive ranch by the sounds , you will be busy so that would suit you . That snake is a beauty , a harmless Garter snake maybe ??? , but , dont go by my identification ... you need a herp freak on that score , lmao .
Now , before I forget , what happened with that DAS blown Gen 1 , you haven't filled us in on that ownership possibillity ?

Yep, round head and pointed tail means non-poisonous in the U.S.

 

[michael parris heuberger]

Yep, round head and pointed tail means non-poisonous in the U.S.

Hi. Every thing that needs to be coated is off to IA Coatings in Huston Tx. Pics to be coming soon. As you saw I went with the long pipe. I also had them mske a dump pipe too. Whitch is on its way to me as I type this.

 

[CallieWilkinso]

I like the seamless headlight set up , and I see your extensive lightening program is well underway . Really like that old school Kawasaki , be great to have a quick old monster like that in the collection .

 

[CallieWilkinso]

I like the seamless headlight set up , and I see your extensive lightening program is well underway . Really like that old school Kawasaki , be great to have a quick old monster like that in the collection .

192.168.100.1 192.168.1.1​

 

[michael parris heuberger]

192.168.100.1 192.168.1.1​

Hi. A few pics. The dump pipe os for the street the long pipe is for tacing.

 

[michael parris heuberger]

Hi. A few pics. The dump pipe os for the street the long pipe is for tacing.

View attachment 1684397

View attachment 1684398

View attachment 1684399

View attachment 1684400

View attachment 1684401

View attachment 1684402

Hi. We had twins!

 

[ROADTOAD1340]

Hi. We had twins!

View attachment 1684496

View attachment 1684497

All good Mike , you got still got it going , with cleaning out the pipes ...thing....lmao

 

[michael parris heuberger]

All good Mike , you got still got it going , with cleaning out the pipes ...thing....lmao

Hi. How many people here have the phone number of a wind tunnel on there phone? I think that I should go to see how it will affect the bike at 250 to 300 MPH. I do think the motor will be good for over 300 but I think as the bike is set up will to much drag. I do hope it will beable to 279 MPH.

 

[ROADTOAD1340]

Hi. How many people here have the phone number of a wind tunnel on there phone? I think that I should go to see how it will affect the bike at 250 to 300 MPH. I do think the motor will be good for over 300 but I think as the bike is set up will to much drag. I do hope it will beable to 279 MPH.

Better ring Lockheed Martin , just ask for 'Skunk Works' ...lmao

 

[LC4CARL]

Hi. How many people here have the phone number of a wind tunnel on there phone? I think that I should go to see how it will affect the bike at 250 to 300 MPH. I do think the motor will be good for over 300 but I think as the bike is set up will to much drag. I do hope it will beable to 279 MPH.

I read an interesting article in Grassroots Motorsports about modern computer modeling (not cheap) vs wind tunnel time (ludicrous). Interesting technology.

 

[michael parris heuberger]

I read an interesting article in Grassroots Motorsports about modern computer modeling (not cheap) vs wind tunnel time (ludicrous). Interesting technology.

Hi. Here is the rods that I custom ordeted from Corrello not off the shelf but built to 1000 HP and 13500 RPM to 14200 RPM over run. They do cost more than off the shelf.

 

[WuzzaCBXRider]

How bout a pic of the rod next to a ruler?

 

[michael parris heuberger]

How bout a pic of the rod next to a ruler?

Hi. It is a Gen 1 rod with 20mm pins with a 2mm stroker Marine crank to make it 1341cc as my class is 1000cc to 1350cc. I will start there than maybe go to 13500cc to 1600cc than1600cc to 2000cc and 2000cc to 3000cc. Gas and fuel classes too.

 

[Bumblebee]

How bout a pic of the rod next to a ruler?

Woah there, this is a family friendly site ya know.......

 

[michael parris heuberger]

Woah there, this is a family friendly site ya know.......

Hi. Looke like I am doing a very good job hurtting my self. About 22 day ago I sliped down the last 3 stairs and hurt my left leg, back and left arm. Now last Friday I cracked 2 ribs.

 

[michael parris heuberger]

Hi. Looke like I am doing a very good job hurtting my self. About 22 day ago I sliped down the last 3 stairs and hurt my left leg, back and left arm. Now last Friday I cracked 2 ribs.

HI. My exhast is on its way back from AI Coatings in TX Phone # 832-666-3143. If anyone need anything coated like parts guns or maybe your rocket ship that you need to get away fron Trunps USA.

 

[michael parris heuberger]

HI. My exhast is on its way back from AI Coatings in TX Phone # 832-666-3143. If anyone need anything coated like parts guns or maybe your rocket ship that you need to get away fron Trunps USA.

Hi. This is a repost of what I said before in a different thread. I am allways looking for stronger and lighter parts. I am still looking for MMCs pistons ( Metal Matrix Composites ). The Mstrix Aluminum,Magnesium Titanium Cobalt and Cobalt- nickel. + Reinforcement Alumina ( Al 2O 3 ),SiC, Zitconia, T i N and CBN ) Also Composites rods and head, bloch and cades made of Magnesium. If only I had F 1 money.

 

[Bumblebee]

Hi. This is a repost of what I said before in a different thread. I am allways looking for stronger and lighter parts. I am still looking for MMCs pistons ( Metal Matrix Composites ). The Mstrix Aluminum,Magnesium Titanium Cobalt and Cobalt- nickel. + Reinforcement Alumina ( Al 2O 3 ),SiC, Zitconia, T i N and CBN ) Also Composites rods and head, bloch and cades made of Magnesium. If only I had F 1 money.

When is this thing ready for it's test ride?

You started this thread in 2017 and it's now 2024.....we are ready to see a bike......

 

[michael parris heuberger]

When is this thing ready for it's test ride?

You started this thread in 2017 and it's now 2024.....we are ready to see a bike......

Hi. Bee. It was not my plan to take this long as I thoughy 4 yrs and $60,000.00 but now $130,000.00 and ? Yrs????¿ May be next yrs or the next I hope.