Need a little help on the 60'

[03LEBUSA]

I hate to tell you this but you have to much sand.

Please next time you go to the track have one of the guys running good number ride your bike. Believe me you will have no more question. Its not the bike or the track it sand.

Problem solved went 9.60s this weekend

 

[Mr Brown]

What were your 60's?

 

[03LEBUSA]

got them down in the 1.61-1.64 range , still needs to come down some but I know its there, the bikes working good, and soon when that 200 shinko is worn I will cut down to the 190 at least or find a lighter tire in a 190. this bike just took some getting used to, my 600's and liter bikes just never had the torque like this thing, and thats I believe where the difference in launching is, thats why I was frustrated b/c my other bikes were never a problem, but anyway I'm getting there I think its got 9.50's in it....Oh and that came by putting the stock 40t on the rear, helped me out

 

[Ft Campbell Busa]

When you get use to it try going up 2 teeth in the rear. When I first got back from Iraq after 14 months, I could not get a good pass in with the 42 tooth. I went to a 40t and ran faster. I later switched back to the 42t and ran the time in sig. at a horrible track.

 

[03LEBUSA]

Yeah I will, I for sure need the throttle mod b/c all the times I ran that I posted I was never able to crack it wide open till I was well past the 60' or so because I had to get another twist on it with a couple fingers , which sucks so I ordered the parts local and should have them by friday when I take it out. I bought R6 and R1 setup so I'll try them out