Need Help with replacing grips

[depo32]

Im taking off my stock grips on my 03 Busa. The left rubber grip came off fine, but the right (throttle) grip has a white plastic sleeve under the rubber. Does this come off?? If so ... how?? Thank you

 

[racerV]

Use an air nozzle, pry up the grip closest to your kill switch and stick the nozzle in then pull the trigger!

 

[HillbillyTom]

The white plastic sleeve is your throttle tube, it stays on. If I'm replacing the grips with new ones, I just slice them lengthways with a razor blade and peel 'em off.
Squirt the inside of the new grip with hairspray and slide it on. When the hairspray dries, it will work like a light duty grip glue.

 

[Schism]

The white plastic sleeve is your throttle tube, it stays on. If I'm replacing the grips with new ones, I just slice them lengthways with a razor blade and peel 'em off.
Squirt the inside of the new grip with hairspray and slide it on. When the hairspray dries, it will work like a light duty grip glue.

ah, i like the "hair spray" trick and i never thought of that one.

 

[wardie]

If you want to save the grips use alcohol on a swab and it will eat the adhesive allowing you to almost pull the grip off. I reused my stock grips when I changed to Heli Bars . Wardie