New Pit-Bull Stand

[BlueHaya]

It is hard to do at first, but gets easier and less scary.  

Get the next to the left side of the bike and line up the stand and the spool on the left side( I have spools) and stand the bike up off the kickstand gently until the right side catches the spool then push real hard to get it started. When you are about half way there it gets real easy, but before you go all the way over I push up my kickstand before the bar gets in the way.  Once you do this you can just easily let the stand do the rest of the work.

I like the forward facing stand because of room and less likely i will be tripping over it sticking out the back.

 

[05 Busa LE]

Awesome, guys!!! Thanks for the help--I'll try her again today.

 

[fstbusa]

let us know how it goes. Its also easier if the rear grab bar is on. I usually balance the bike by grabbing the other side of the seat.

 

[mjn]

I have the rear facing Pit Bull, but for me it is pretty easy to do myself..... Take your time..I'll bet you can figure it out.

 

[georgiabusa_05]

I had a hard time with the rear stand with the handle out the back so I got the one like you have.

standing next to the bikes left side, let the bike lean on your left leg for balance, then put the side stand up so it will not be in the way of the rear stand. Now, line the left spool holder on the stand up on the spool, then look and line up the other side, when both sides are lined up , push down while still letting the bike rest on your left leg while you are holding the left bar with your left hand and give her a push down with your right hand.
Hope this helps, I was nervous the first few times I tryed it but now its nothing.