New Siegler bars finaly done.

[iride]

I will see if i can get some pictures of the side..

 

[iride]

How about this a picture from back a little further,,,,, Gives you an idea of the bars,,,,

 

[iride]

Oh yea I also have a picture of the strob stop light I installed......
I guess I need to post this under lights?

 

[iride]

This is the front of the bike looking at the handlebars. You can see my little
blue lights on top of the shield, they light up with RADAR>>>>

 

[Djxtrodinaire]

looks like you did not modify your windscreen?

also is there room for the fork tubes to rise? My 08 is lowered.

 

[iride]

Modify windscreen ? how, I am all ears...
Yes I could raise my fork tubes, No problem with the new top triple clamp....
Mike

looks like you did not modify your windscreen?

also is there room for the fork tubes to rise? My 08 is lowered.

 

[Djxtrodinaire]

Modify windscreen ? how, I am all ears...
Yes I could raise my fork tubes, No problem with the new top triple clamp....
Mike

I meant some people did cut out their windscreen due to bar clearance and yours is not.

 

[iride]

I do not know of anyone that has had to cut out the windshield to clear the bars, Even with the larger Suzuki touring shield the bars hit but at the very end of the turn lock to lock.....
Mike

I meant some people did cut out their windscreen due to bar clearance and yours is not.

 

[Djxtrodinaire]

no?

well its all over the org and spieglers site too ???

could be your handle bar is different from this picture... i cannot tell...

 

[iride]

Hey i like them clutch and brake levers you got. I got mine ordered,...
Also what bar ends did you use? are those Siegler bars?
Mike

no?

well its all over the org and spieglers site too ???

could be your handle bar is different from this picture... i cannot tell...

 

[raydog]

Hey, did I see a KLR in that garage?
(sorry for quick jack)

 

[Dr E]

How much are we looking at in cost for the whole mod? I am really liking the silver ones!

 

[iride]

Yea, There are two of them in the garage, One with a fresh 685 kit and the other one is a 2003 with 2000 miles on it, Nice

Hey, did I see a KLR in that garage?
(sorry for quick jack)

 

[iride]

Here is that side shot that someone was wanting, sorry about all the wires and stuff, My new shop is being built and I have all my stuff crammed in this building...

 

[iride]

Oh I see that my screen guard for my radiator is in the back ground of the last picture, I am not sure if I have to pull the body work to install the screen
I got it from 58 cycle place, A couple of weeks ago a GSXR 1000 and a ZX 14
had holes in there radiators from some of the gravel that has been put on the roads,,,, Screen guard insurance,,,,,
Mike

 

[Turbo Bob]

I got the gold bars on my 08 Busa, The ID of the bars are like 14mm
No good bar ends fit, and sure can not get the stock bar ends to fit back on,

I have those bars on two bikes. I took a nut of the right size rounded off the edges inserted it into the bar and had a friend weld them into the end of the bar. Then just used the stock bar end. On the second set I used a longer bolt put a piece of rubber hose over it like fuel hose a small washer with a lock washer and a nut pushed it into the bar and tightened it. the welded set up works better but the one works good also.