The clamp came on the arm. Flowtech here in the Chicago Suburbs did it before I bought the arm. I've seen clamps like that in Jegs, Summit and other places like that, so I would think if you've got someone that can weld it, unless it's a chrome arm I'd go that route. I cant tell what kind of arm you've got, if it's a stock arm with extensions or a stretched arm, but either way you should be able to get one like that on there. Shoot me a picture of your arm and I or someone here on the board will give you the best suggestion.
Nitrous Kit
- Thread starter 1slowbusa
- Start date
I've been wanting to go w/ some swingarm extenders but was always under the impression that extenders + nitrous = tragedy. Was only wanting to extend about 2" or less. (right upto the stock fender) Interested how this will work for you as I've been saving my duckies for CMike arm instead.
Here's a mount you drill,tap and locktite it on,also has antidrop hook,bottle can be mounted any direction..
ToXSicK RoCKeT
Registered
As long as you buy "quality" extentions, make sure everything in nice and tight(i even used red loctite on extention bolts to swingarm), you'll never have a problem
I put about 75 bottle's through my ZX12R with extentions and NEVER had a single issue!(mine where from spencercycle's) 
As long as you buy "quality" extentions, make sure everything in nice and tight(i even used red loctite on extention bolts to swingarm), you'll never have a problem
Wow... This reopens my options. Off we go to the search engine looking for them "quality" extensions. Preciate ya!
Last edited:
ToXSicK RoCKeT
Registered
Wow... This reopens my options. Off we go to the search engine looking for them "quality" extensions. Preciate ya!
Anytime Bro!
BTW, check out spencercycles.com they have some VERY nice extentions that are reasonably priced, there customer service is awesome too!
Last edited:
ToXSicK RoCKeT
Registered
Gixx.....The last picture is a little unsettling for me! I KNOW YOU KNOW WHAT YOUR DOING
, and maybe its just the angle of the pic but that allen bolt looks to be way too short, and it's only grabbing about 3/16" of the lock nuts, i see the "red loctite" but even so 
Please explain 
lease: BTW, Those do look pretty trick, i like the lock nut set-up on them, who makes them?
Last edited:
Gixx1300R
Registered
Gixx.....The last picture is a little unsettling for me! I KNOW YOU KNOW WHAT YOUR DOING
BTW, Those do look pretty trick, i like the lock nut set-up on them, who makes them?
Now you can see how thick they really are.
1slowbusa
Registered
What is the price of a CMike arm?
Wow... This reopens my options. Off we go to the search engine looking for them "quality" extensions. Preciate ya!
I got some great extensions that will fit like no other on the market from a few feet away the arm will look like a whole arm..
ToXSicK RoCKeT
Registered
Now you can see how thick they really are.
AHWWW OK.....thought i was missing somthing
Ya Gixx though's sum beotches look STOUT! 
You make them too?
Last edited:
ToXSicK RoCKeT
Registered
Sounds interesting, can you PLEASE post some pics of them, with a little more info?
Gixx1300R
Registered
AHWWW OK.....thought i was missing somthing
Yep,been making extensions since 1993,I have a Patent on my stainless steel wellnuts. They are designed to spin and press against each other as well as pull inwards from both sides when you install them.You can also torque them down more since the Bolts and Wellnuts are stainless. Other extensions just bolt in from the side of the mounting plate and the aluminum is tapped.
Last edited:
ToXSicK RoCKeT
Registered
