Pair Valve Mod

[shenoyp]

I could not resist the temptation! I ended up buying a Muzzy Taitanium full exhaust system, with Carbon Fiber can from Schnitz.

I have come across this board that the Pair Valve mod is almost mandatory, I wanna do it on Elenor... but I'm not able to find those Pair Valve Blocks on the Schnitz site. Any idea where I can buy them online

Also, can people who have done the mod please give me a small brief as to how its done

Showing pictures of the mod will also help

Thanks in advance for all the help

Here is a picture of the exhaust system! Its the one at the bottom of the picture... but with a carbonfiber can

....

 

[Pipefighter248]

Here are two places that sell them online. Let me check to see if I have a pic of them installed.

 

[Pipefighter248]

Here is a pic of the pair mod done. Look just above the headers. That is where they are located.

 

[warbrown]

I bookmarked this thread a while back of Busahaya's install pics for when I do the mod.

 

[shenoyp]

Here are two places that sell them online. Let me check to see if I have a pic of them installed.

Thanks for the info...

I also got that on the brockracing.com site ... purchased it from there

Thanks a lot for the picture... it says a lot

 

[Pipefighter248]

You Still have to remove the pair valve and plug a line. The BDE pair kit comes with detailed instructions, so it should be an easy install.

 

[shenoyp]

I bookmarked this thread a while back of Busahaya's install pics for when I do the mod.  

thank you warbrown... that thread is very comprehensive

...I'll put it in my favourites....

 

[BA BUSA]

 

[Jynx]

Another thing that you may want to remember...as a tip...is that any time you are doing work on or around the header area, behind the radiator...tape a piece of cardboard to the back of the radiator to help protect it, as even your hand touching those little metal fins will bend them.

 

[ICEMANN]

I was under the impression that instead of removing the pair to the mod (move line from air box to crank) gives ya about a 2 hp gain vs removing it and saving 1.5 lbs?

JD

 

[shenoyp]

I was under the impression that instead of removing the pair to the mod (move line from air box to crank) gives ya about a 2 hp gain vs removing it and saving 1.5 lbs?

JD

hmmm... that sounds interesting. Any link on the net that explains how it is done Ice

 

[IL_BusaBoy]

Very easy install. Just follow the directions that come with the pair kit.

 

[Southside Playa]

Shenoyp, how much did the exhaust hit you for, if you don't mind me asking? I am a real big Muzzy fan from my Kawasaki days. I have two RS3's right now, but I know 4 to 1 with a Muzzy would sound dayum good.

 

[shenoyp]

palaya... i bought it from schnitzracing.com, and the full titanium exhaust along with carbon fiber cans cost me in the range of about 1,200$ (a lil less than that actually)

You might want to checkout their site... they have quite a few options with exhausts

 

[shenoyp]

I'm a new fan of Muzzy stuff... after I bought their alluminium fan for the radiator! That one works so well... thats half the reason that I opted for a muzzy exhaust system

 

[bacharles]

Great job shenoyp. Sounds like you've got everything just about under control.

 

[bacharles]

Shenoyp, how much did the exhaust hit you for, if you don't mind me asking?  I am a real big Muzzy fan from my Kawasaki days.  I have two RS3's right now, but I know 4 to 1 with a Muzzy would sound dayum good.

Hey SSPlaya, check out www.parts411.com for some good prices on exhausts.

 

[busahaya]

 

[Pro Machining]

If you guys are ever needing pair valve block off plates let me know. We sell CNC machined ones on our website for $19.95. Go to products then to engine components.
www.PMRcomponents.com



<!--EDIT|Pro Machining
Reason for Edit: None given...|1112227830 -->

 

[ALLshow.NOgo]

Hey Pro Machining, Thanks, I got your plates off eBay a while back and they where 14.95$ great quaulity just like the next. Don't know why spend 60$ for pieces of metal rather than 14$ that function just like the rest