pair valve sucker mod

quizesilver

Registered
anyone heard of this.
i heard is goes something like this...

reroute the hose from the pair valve from the air box to the crank case breather.
then take the crank case breather hose and plug to the two plug at the air box.

anyone done this mod before?

thanks
 
Black Mamba Motorcycle GIF by Moore Mafia
 
Here...to answer this 16 year old question.
Pressurizing the crankcase on big cc bikes, 900ish and up, is supposedly usually good for 2 to 3 hp.
I have my '03 Gsxr1k this way, as did a few of my friends over the years.
We never saw any negative side effects, but with almost 40k on my engine, I'm curious to see if any gaskets will give up, lol

Screenshot_20241015-081823_Gallery.jpg
 
Here...to answer this 16 year old question.
Pressurizing the crankcase on big cc bikes, 900ish and up, is supposedly usually good for 2 to 3 hp.
I have my '03 Gsxr1k this way, as did a few of my friends over the years.
We never saw any negative side effects, but with almost 40k on my engine, I'm curious to see if any gaskets will give up, lol

View attachment 1688194
You aren't supplying that much positive pressure to blow gaskets.
 
That’s weird bcuz most of the dragbikes have vacuum pumps to depressurize the crankcase for more hp.
 
That’s weird bcuz most of the dragbikes have vacuum pumps to depressurize the crankcase for more hp.

An add-on to eliminate resistance, vs old school, which uses what's there for a little extra push, but is only a couple hp.
 
Yea it’s an add on but I was more referring to you saying you’re pressurizing the crankcase and getting a few hp, and a vacuum pump DEpressurizes for more hp. It’s Interesting
 
Back
Top