Pro machine triple installed

[badboysbailagnt]

Hey guys i got my Pro machine triple in and installed a few nights ago.  In these pics i was just playing with the ride height to see how it would look this low.  I doubt i will even try to ride the way its sittin, maybe raise it back up an inch.
The pic they have on there website doest do it justice.  I was very suprised how chrome looking this thing is,  the one on there website is kinda dull.  I ordered it from daniel aka"goldenchild" on here.  I got it faster than i thought i would and he is always there to answer any questions i have.  I recomend everyone to him!!!! Ok heres the pics sorry for the size



<!--EDIT|badboysbailagnt
Reason for Edit: None given...|1133928216 -->

 

[badboysbailagnt]

another



<!--EDIT|badboysbailagnt
Reason for Edit: None given...|1133928306 -->

 

[badboysbailagnt]

another



<!--EDIT|badboysbailagnt
Reason for Edit: None given...|1133928370 -->

 

[BigBSBusa]

Looks good, but realized I couldn't have mine very low at all.

 

[badboysbailagnt]

another

 

[GoldenChild]

Looks good,raise it till 3/4 to no more than 1" is thru the tree and wipe them fingerprints off of it glad you liked it.I owe you a little discount on the next part holla when ya ready.

 

[MoosesBusa]

Just a llittle friendly advice. Put some flat bar on the end of your kickstand. In the hot summer months that will poke thru the asphalt and you'll come out to her laying on the side.

 

[badboysbailagnt]

im going to get a adjustable kick stand before summer anyway yeah i got to get them finger prints off

 

[milesbm]

I was told by a couple racers (Ryan Schnitz and Brock Davidson I think) that you should not goany lower than 1.5" in the front. This is because it changes the aspect and the damper can't overcome the forces and it can go into a tank slapper. I am not sure about street riding only but they said for drag racing it does.

 

[greeneinc]

Nice look. Since the front end was lowered, do you have to worry about hitting the front wheel into the upper fairing?

 

[badboysbailagnt]

im not going to ride it that low. Im going to get a set of real stiff cut forks with only 1 inch of travel or a extra set of solid forks

 

[JROCK]

NICE, HOWS THAT HOLE SHOT

 

[JROCK]

I was told by a couple racers (Ryan Schnitz and Brock Davidson I think) that you should not goany lower than 1.5" in the front.  This is because it changes the aspect and the damper can't overcome the forces and it can go into a tank slapper.  I am not sure about street riding only but they said for drag racing it does.

90WT OIL IN THE DAMPER.



<!--EDIT|JROCK
Reason for Edit: None given...|1133972539 -->

 

[badboysbailagnt]

already did the 90w i did get a small shimmy the other night after i let out of it in 3rd at about 120. Can you put thicker oil in it

 

[sageronin]

I like it ... great mod Bro!!