Question bulbs

[stellaro]

A big hello to everyone! The day after tomorrow, I will finally be the owner of my black Hayabusa gen3. In the meantime, I have studied the user manual and at the line "replace bulbs", surprisingly, they say that the entire group must be replaced in the event of a bulb breaking. It seems absurd to me, is it really so? Thank you

 

[Rubberrabbit]

There is a saying "Full LED, full Light, full costs" Its true, its a complete Unit, everything is build arround it. Its sealed.

 

[stellaro]

Thank

 

[Spudley]

in answer to your question, you have no bulbs to change. The turn signal assembly's are sealed, the gauge cluster can be repaired, as far as the owners manual and the factory repair manual they both read must replace unit. I am working with a shop in San Diego who is fixing my rear tail light assembly as I have bought a back up, and after the turn signal relay fiasco I've got a lot of information for you guys.

Once I get the rear tail light assembly back repaired, I'll post up shop information and cost on repair. That is if you short out a turn signal, or a brake light, or a running light. The trick is getting the two pieces apart and softening the adhesive. My shop knows how to do that.

The rear tail light assembly is $450 plus tax and shipping. The front turn signal assembly's are $150 plus tax and shipping. These are new replacement costs. The gauge cluster will cost $1500.

We're going to figure it out so we can repair these things for much less. We have the gauge cluster figured out. You don't have to pay 1500 bucks to get your gauge cluster fixed.

 

[sixpack577]

That's great
$1500 isn't cheap, but now a $1200 warranty doesn't sound like a need for me anymore, as I was only concerned about electronic failures anyway.

 

[Spudley]

I've got your back, I've got everyone's back. We ain't doing this BS again.

I've got the turn signal relay chips, and a shop that'll do it for $100 a chip. So if you burn out your gauge cluster installing an alarm or any other electronica accident, we can fix that. If you want them to upgrade the wiring pigtail from the harness to the gauge cluster so you can flash your turn signals I think they said something like $350 for that.

No worries boys !.