sjg34
Registered
I am in the process of doing it now. So far I have weights for the rear but I have some variables
My stock gen 2 wheel has a shinko 180 tire that is about 1/2 tread, a stock rotor., and a 47 tooth sprocket The new r1 rear wheel has a 190 shinko pro with a galfer rotor, ti rotor bolts, and a 46 tooth sprocket and per my scales I save 2.4 pounds. I will use the R1 caliper and brake hanger another 6 or 8 oz but I don't have a good weight for that yet. I will need to add a spacer to take up the additional space for the r1 brake hanger at maybe a 2 ounces
I should get the front started next week
My stock gen 2 wheel has a shinko 180 tire that is about 1/2 tread, a stock rotor., and a 47 tooth sprocket The new r1 rear wheel has a 190 shinko pro with a galfer rotor, ti rotor bolts, and a 46 tooth sprocket and per my scales I save 2.4 pounds. I will use the R1 caliper and brake hanger another 6 or 8 oz but I don't have a good weight for that yet. I will need to add a spacer to take up the additional space for the r1 brake hanger at maybe a 2 ounces
I should get the front started next week
