Stock busa in the 1/4

[MET]

I've had mine at 10.27 stock. Hi everyone,,, I'm new here.

Very good time...

 

[ICNDU2]

I have gone 9.60's on a stock 2001 (lowered only)!

 

[Silver Bullitt]

First off I'd like to say Hi to everyone here. Second, I must say that this is one of the best sites I've been on. You guys have great tips and tricks as well as mods. My best time is 10.14 (lowered, strapped and 16 tooth) 10.20 before the sprocket change. I weigh almost 200lbs no gear.

 

[on one wheel]

Hi everyone new here. I looking to get a busa within the week and i want it to atlest run 9.20's
9.40's in the 1/4 with a 240 lbs fat boy on the saddle. any suggestions looking for a 99 to 2003

 

[on one wheel]

Hi everyone new here. I looking to get a busa within the week and i want it to atlest run 9.20's
9.40's in the 1/4 with a 240 lbs fat boy on the saddle any suggestions looking for a 99 to 2003:

 

[dragit]

Stock wheelbase to go 9.20-9.40 on motor you'll probably need a 1397 pkg

or

you could probably obtain 9.40's with head/cams and a dry shot

or you could put inches (4-6) in the arm and probably do it with just a dry shot. But its all dependant on how you ride and what you want to do.

 

[banditoo]

ran a 10.8 at the 1/4 mile here stock and we are high, 3500 ft above sea level ..

 

[Richierich]

Hey on one wheel, If you are planning on going that fast, you are going to need a little stretch, and some turbo power, or some NOS.

On this bike, I have only been down the track about 12 times, and the fastest I have been is a 9:40 @159, with a really bad 60 foot time (1:72). I am also at 5400 feet altitude. With a shiddy slippery track, tire spinning the whole way..

Cant wait to get to Vegas on a good track, and good thick air.