Tig Welder thoughts

[202mphbusa]

Eastwood 200 Amp Elite MP200i Multi Process Welder MIG - TIG - Stick

A powerful all-around welder, the Eastwood Elite MP200i lets you MIG, TIG, flux, or stick weld steel or aluminum up to 3/8-in thick with just a single machine.

www.eastwood.com

Getting close to getting work to get me a do all welder
Mostly for sheet metal on the CNC machines
some Light fab
and Welding Aluminum

 

[RedBull]

 

[Jbaby1969]

From what I have learned when researching welders, most of the off brand welders are made by either Miller or Lincoln. For the most part all of them are decent.

 

[Kiwi Rider]

Nice little unit, and pretty well priced.
We pay a lot more for that type of equipment here in little ol' NZ.
Are going to have it at home, or at your workplace?

 

[Boosted Cycle Perf]

Eastwood 200 Amp Elite MP200i Multi Process Welder MIG - TIG - Stick

A powerful all-around welder, the Eastwood Elite MP200i lets you MIG, TIG, flux, or stick weld steel or aluminum up to 3/8-in thick with just a single machine.

www.eastwood.com

Getting close to getting work to get me a do all welder
Mostly for sheet metal on the CNC machines
some Light fab
and Welding Aluminum

That’s not an AC welder, it won’t tig aluminum.

Have you looked in to Everlast welders?

 

[202mphbusa]

That’s not an AC welder, it won’t tig aluminum.

Have you looked in to Everlast welders?

I will now

 

[Boosted Cycle Perf]

I will now

This is what I use.

PowerPro 205Si | Everlast Generators

Looking for a good all around welder with some extra features? The PowerPRO 205Si from Everlast is designed to be just that unit. With 200 amp TIG, 160 amp Stick and 50 amp Plasma cutter capabilities, the digitally controlled IGBT Inverter welder/cutter is an all-in-one solution that is useful...

www.everlastgenerators.com

That machine has single handedly converted very many die hard red and blue machine guys because of its features, duty cycle, performance and value. I run that machine hard. While it’ not intended for production work, it’s never skipped a beat. Hell, an inverter type 60 amp stand alone plasma cutter is only a few hundred dollars less then this machine.

I also have the tig torch cooler, and a 60amp mig from them as well. The board burnt up on my mig. Their customer service had a replacement in my hand 2 days later free of charge.

lastly, don’t pay much attention to the prices on the website. Once you find one you like, pull it up on amazon and it’s usually $2-400 cheaper and free shipping.