G
Guest
Want to dyno my Busa for a baseline before mods. Harly dealer in Savannah GA has one. What is average price for this service?
Gixx1300R
Registered
Dyno runs vary.Some guys just do a 4th or 5th gear run.Some guys do all gear runs.I have access to a Superflow 250 that I get ny runs on for free.It all depends on the type of Dyno but it shouldnt be more than $25 per run.When a dyno operator gets a new $30,000 dyno you better believe a run will be alittle more.
OB_THE MOTORHEAD
Registered
i charge 35$ for 3- 4 pulls.
OB_c_rod2000
Registered
i wouldnt be to quick to take your bike to a harley dealer. bad news, i dont care what anyone says they will try to blow that bike up. without a doubt.
OB_SUPERTUNER
Registered
We do several different programs for the varying needs of our customers. There is $20.00 "NO FRILLS" run. This is a one shot deal without any RPM data. We also offer a deal for $35.00 that gets a rider/racer a complete "performance evaluation" with RPM printout. This seems to be our most popular one of those two. Beyond that, we will also tune a customers bike in great detail for around $400.00 - $500.00 per day depending on
the mechanical work required. We have a great
header and jet kit/ remap program as well for any bike...it is this, buy a header and jet kit from us for the regular retail price and allow us to install both and we will give away 3 free dynoruns. Usually what we like to do is dyno the bike as it arrives prior to the work and then 2 more runs after all the work has been performed thustly guaranteeing the customer that the work was performed correctly and the products used were doing their job. Of course we also partake in the Dynojet and K&N "FREE DYNORUN COUPON" program. I have a custom built Dynojet Dynamometer with and extra, extra high inertia drum. Connecticut based.
www.easterncycleperf.com
the mechanical work required. We have a great
header and jet kit/ remap program as well for any bike...it is this, buy a header and jet kit from us for the regular retail price and allow us to install both and we will give away 3 free dynoruns. Usually what we like to do is dyno the bike as it arrives prior to the work and then 2 more runs after all the work has been performed thustly guaranteeing the customer that the work was performed correctly and the products used were doing their job. Of course we also partake in the Dynojet and K&N "FREE DYNORUN COUPON" program. I have a custom built Dynojet Dynamometer with and extra, extra high inertia drum. Connecticut based.
www.easterncycleperf.com