Actually it is a combination of mounts. The cradle is the Garmin one that comes with the Car Kit. I took the swivel off of it and bolted a 1" Ram mount ball to it. The Ram ball had a round plate with 4 screws that matched the Garmin Pattern. I had to hit the hardware store for the screws. I used a 3" Ram Arm. The stem mount is a 1/4"-20 X 12" stainless all-thread. The ball is a RAM part number B273-U. The ball has a 1/4-20 hole. I loctited the ball to the all-thread. I slid a couple of 1" pieces of 1/4 vacuum over the all-thread to keep it centered and dropped it through the stem. Mark it and cut off the excess (about 3/4 “) and put a ¼-20 nylock nut on it.
This is the Garmin mount I took apart for the cradle link You can see the 4 holes I used to bolt it to the ball mount.
This is the RAM version of the cradle. The Garmin is more secure. Link
This is the actual kit I bought. You can see the base I used to bolt to the back of the Garmin Cradle. Link
Anybody got the Quest II yet ? I am looking to upgrade from a V , and want to know pros and cons of the Quest II if anyone has one ! Thanks to anyone with ideas or opinions
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.