Windshield vibration fix??

[MeatGrinder]

At certain rpms I have a vibration in the windshield. Any fix out there?

 

[sageronin]

I've heard that electircal tape along the edges is the way to go ... haven't had to do it myself though.

DJ

 

[CYCLEERIC]

the tapre trick sure cured mine

 

[BigDawg_03Busa]

Denniskirk.com sells a windscreen trim that I bought. No vibs since. I'm trying to find a link.

 

[bigpoppa1969]

I did the electrical tape thing, still vibrates.... what to do???

 

[Jace]

Use more tape !!

 

[jumbo]

Try some clear silicone. I haven't tried it but should work I put tape on my DB windsceen and no vibrations but if it starts to I am going to try the silicone trick.

 

[vman1300]

I used 2 layers of tape on mine. No probs since.

Vman1300

 

[ks-waterbug]

Go to your local hardware store and buy some window foam (comes on a roll). Should have sticky stuff on one side, don't use the really thick stuff.......

 

[fstbusa]

ELEC tape cured my vibration

 

[mctrull]

I did the electrical tape thing, still vibrates.... what to do???

I hope that you took the windshield out and put the tape on the inside edges and not on the outside edge. (had to ask)

 

[bigpoppa1969]

ddrrrrrrrrrrrrrrrrr:angry:

 

[phatjoe]

I hope that you took the windshield out and put the tape on the inside edges and not on the outside edge. (had to ask)

gotta laugh at that one

 

[bsrigley]

Electrical tape works fine just put enough layers on the tabs of the windscreen that it feel snug when you push it back in place. I actually used screen spline (the stuff that holds the screen tight on the windows in your house.) I tried the rubber stuff first but it seemed a little too tight so I bought the rigid foam spline from Lowe's and it worked great. Hope this helps.

 

[MeltDownZ]

I tried electrical tape in one layer, and then 2, neither worked.  Then I tried 2 layers of that black cloth type electrical tape called friction tape.  That worked like a charm.

I'm now an expert at removing and reinstalling the windshield.  Definitely easier to remove the 2 inner push pin rivits and then pull the black rubber well-nuts through from the inside.  Lubing the well-nuts with DW40 allows them to slide back in from the outside pretty easy.



<!--EDIT|MeltDownZ
Reason for Edit: None given...|1089694733 -->